Ant Metro nest by herbyvor

Last crawled date: 3 years ago

here we got a little 4 window single chamber cube nest, suitable for heating wire/mats and easily hydratable. should be super cheap to make ideally under £10.
Extra things youl need:
4 x A8 4mm acrylic sheets (74 x52mm)(99p each in most outlets online)
4 x small screws around 4mm diameter shaft
some 12mm (Inner) tube for connecting
need to print 8 window corners,4 windows, 4 washers and 1 main chamber. (4 lifter feet optional)
the window corners sit in the left and right bottom corners infront of the acrylic sheet with the rounded corner facing towards the centre of the nest just to hold the window extra tight. you might not need them if your using window covers but will help there allighment. washer goes on the screw and is put into the 4mm diameter hole at the top of the window indent to fasten the top side of acrylic.