Thingiverse
Another Humane Mouse Trap
by Thingiverse
Last crawled date: 6 years, 4 months ago
I printed the trap using normal pla 0.2mm resolution. It worked first go, and no harm was caused to the little mouse :).
Assembly is pretty straightforward. Assemble the door hinge to the top cover. You may use 5.6 to 5.8mm dia copper or aluminum tubing if you have difficulty printing the pin of the hinge smoothly.
Assembly is pretty straightforward. Assemble the door hinge to the top cover. You may use 5.6 to 5.8mm dia copper or aluminum tubing if you have difficulty printing the pin of the hinge smoothly.