Thingiverse
Animatronic Stewart Platform by i-make-robots
by Thingiverse
Last crawled date: 4 years, 6 months ago
Please note: the claws in the preview picture are experimental and not included in this package.
https://www.youtube.com/watch?v=iEGRaUqJzwU
Uses many M3x15s, M3x10s, and six 10cm long M3 threaded rods.
The PCB is an ELEC-0132 ASP board from http://marginallyclever.com/
All parts were printed on Prusa MK3s at default settings. Rotate the parts and you won't need supports.
the DXF file is for the wood base. Two copies should be laser cut, one with the larger holes and one with the smaller. this keeps the screw heads from scraping on the table.
https://www.youtube.com/watch?v=iEGRaUqJzwU
Uses many M3x15s, M3x10s, and six 10cm long M3 threaded rods.
The PCB is an ELEC-0132 ASP board from http://marginallyclever.com/
All parts were printed on Prusa MK3s at default settings. Rotate the parts and you won't need supports.
the DXF file is for the wood base. Two copies should be laser cut, one with the larger holes and one with the smaller. this keeps the screw heads from scraping on the table.