Thingiverse
ANET_A6_1KG+ HEAVY_SPOOL_HOLDER_FILAMENT_GUIDE / LIGHT by 77-17
by Thingiverse
Last crawled date: 4 years, 7 months ago
The Spool Daddy
[Slightly Better than the print pictured. (Shortened, CREE light and wire loom loc add.)]
Print parts as set on pallet.
No Supports Required except for the filament guide from the build plate.
Tolerances Met, Test Prints Fit beauty.
2 to 4mm wall 70 to 100 percent fill on everything except the holder part @ 50-70 % fill
.3mm layer height works fine.
-Should lend itself to print with volcano and 1mm nozzle-
Supplies
12 Volt Cree Button LED light x 2https://www.banggood.com/12V24V-Mini-Round-LED-Bullet-Button-Side-Marker-Lights-Metal-p-1195610.html?rmmds=search&ID=233&cur_warehouse=CN
Holder Part Can be used on its own as a universal stand alone spool holder.
[Slightly Better than the print pictured. (Shortened, CREE light and wire loom loc add.)]
Print parts as set on pallet.
No Supports Required except for the filament guide from the build plate.
Tolerances Met, Test Prints Fit beauty.
2 to 4mm wall 70 to 100 percent fill on everything except the holder part @ 50-70 % fill
.3mm layer height works fine.
-Should lend itself to print with volcano and 1mm nozzle-
Supplies
12 Volt Cree Button LED light x 2https://www.banggood.com/12V24V-Mini-Round-LED-Bullet-Button-Side-Marker-Lights-Metal-p-1195610.html?rmmds=search&ID=233&cur_warehouse=CN
Holder Part Can be used on its own as a universal stand alone spool holder.