Thingiverse
Anet A8 X-belt Toothed Idler Tensioner by butchja
by Thingiverse
Last crawled date: 4 years, 1 month ago
Hey,
i thought it was time to replace that toothless idlers. This is a modified version of freemark's x-belt tensioner. It has a conical mount for the bearing of the idler.
What you need in addition:
1x GT2 toothed idler with:
5mm inner hole diameter
20 teeth
18mm outer diameter
9mm thickness
1x M5 screw (>16mm)
1x M5 nut
2x M4 30mm screws
2x M4 nuts
for further information read the readme of the original tensioner
edit: added 3mm axle version
! hint: some modern Anet A8 might not have 3d printed parts. Check the remixes if your Anet has injection molded parts !
i thought it was time to replace that toothless idlers. This is a modified version of freemark's x-belt tensioner. It has a conical mount for the bearing of the idler.
What you need in addition:
1x GT2 toothed idler with:
5mm inner hole diameter
20 teeth
18mm outer diameter
9mm thickness
1x M5 screw (>16mm)
1x M5 nut
2x M4 30mm screws
2x M4 nuts
for further information read the readme of the original tensioner
edit: added 3mm axle version
! hint: some modern Anet A8 might not have 3d printed parts. Check the remixes if your Anet has injection molded parts !