Thingiverse
Anet A8 Diagonal Vibration Stabiliser by phreakkk
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is my custom diagonal stabiliser for my Anet A8 Frame.
I designed them because all other designs are screwed to the Y axis (I had some other plans).
At the moment, I am planning to create a separate plate for my table, so my printer will be movable without unscrewing or new adjust anything. Fast and safe!
These parts are fixed on top of the printer, just as all others, with the one screw for the Z axis.
The hole is made for a M8 threaded rod, mounted in a 20° angle to the table.
I also added a hole for these user, who use "anti-wobble" parts on top. If everything works, I will make a better version for these users
ALL PARTS CAN BE PRINTED WITHOUT SUPPORT!
Maximum angle of the top parts = 20°
I designed them because all other designs are screwed to the Y axis (I had some other plans).
At the moment, I am planning to create a separate plate for my table, so my printer will be movable without unscrewing or new adjust anything. Fast and safe!
These parts are fixed on top of the printer, just as all others, with the one screw for the Z axis.
The hole is made for a M8 threaded rod, mounted in a 20° angle to the table.
I also added a hole for these user, who use "anti-wobble" parts on top. If everything works, I will make a better version for these users
ALL PARTS CAN BE PRINTED WITHOUT SUPPORT!
Maximum angle of the top parts = 20°