Anet A6 Z switch height adjustment by BrienAllison

Last crawled date: 3 years, 4 months ago

A small bracket for adjusting the height of the Z-axis limit switch on the Anet-A6.
You need to use an extra two M2 self tapping screws (I found a couple spare with my kit) which are used to hold the switch to the bracket, and then the bracket to the frame.
I have two bracket STLs, 'endstop bracket 6' moves the endstop 6mm up or down, and 'endstop bracket 12' moves 12mm up or down.
I have added a .STEP file and fusion 360 file if you want to adjust it to a custom height (or just make your own, it's basically a rectangle with holes in it).
It works with the original Z carriage as shown. I moved my endstop down 12mm to fit a Titan Aero I mounted to my printer, and this is as far down as you can realistically go before the Z carriage hits the bracket before the switch (or you could potentially modify the Z carriage to avoid this).