ANET A6 UPGRADE to SKYNET 2.3.2 AUTO for CURA 2.6.2 by Sirassassin

Last crawled date: 4 years, 7 months ago

ANET A6 UPGRADE to SKYNET 2.3.2 AUTO for CURA 2.6.2
Start :
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 ; Auto Home All AXIS
G29 ; Auto Bed Levelling
M84 ;steppers off
M0 S12 ;wait 12 seconds
M17 ;turn steppers on
G1 Z10.0 F300 ;move the platform down 10mm
G92 E0 ;zero the extruded length
G1 F200 E8 ;extrude 8mm of feed stock
G92 E0 ;zero the extruded length again
M0 S5 ;wait 5 seconds
G1 F9000
M117 Printing...
M851 Z-0.27 ; offset setting sensor -5.00 - (you setting, my setting 4.73)
M500
End:
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting nozzle, to release pressure
G1 Z+140 E-3 X+1 Y+200 F9000 ;move Z up a bit and retract filament even more
M84 ;steppers off
G90 ;absolute positioning
RED no Coping