Thingiverse
Anet A6 Proximity sensor support by mr_emme
by Thingiverse
Last crawled date: 4 years, 8 months ago
This is my first 3d object, so please be kind with me :P
I made few changes to the original part for the 18mm proximity sensor:
moved the ring a bit lower because otherwise you cannot hold it firmly with the bolt
add a T-bar on the higher fan ring to hold cables from the carrige
I still have to print it and test it.... my only concern is about the ring size that could interfere with the x-stop switch...
Print at 0.2mm
PLA
Supports not needed
30% fill
hope you enjoy it
I made few changes to the original part for the 18mm proximity sensor:
moved the ring a bit lower because otherwise you cannot hold it firmly with the bolt
add a T-bar on the higher fan ring to hold cables from the carrige
I still have to print it and test it.... my only concern is about the ring size that could interfere with the x-stop switch...
Print at 0.2mm
PLA
Supports not needed
30% fill
hope you enjoy it