GrabCAD
Android Logo
by GrabCAD
Last crawled date: 5 months, 4 weeks ago
Android logo making in Solidworks
SKETCH 4: -
PROCEDURE :-
1. Select the units of drawing from status bar, that is millimetres (millimetre, gram, second). 2.Select any plane to draw. 3.Select sketch command for starting the sketching. 4.Draw two circles with centre at 14 mm height and 11mm width from the centre line of semi-circle on both sides of centre line with 5 mm diameter. 5.Then draw a line with 13 mm length and 30 ° angle from centre line at a distance of 8 mm to each side. Of centre line of semi-circle. 6.Draw a line with length of 48 mm below semi-circle at a distance of 3.8 mm. 7.Draw a horizontal line of 50 mm and once again a vertical line of 46 mm. 8. Draw line between two verticals of 46 mm. 9. Draw a vertical line with 30.8 mm and draw circles at end points with 3.6 diameter at at a distance of 6.6 from semi-circle centre line from the endpoint of semicircle centre line. 10. Draw tangents from two circles to make it into a complete closed figure from the end points of centre line. 11. With mirror command draw the figure drawn in steps 9 to 10 with centre line as reference line. 12. Then draw a vertical line at a distance of 6.25 mm from the centre line draw at distance of 12.8 from the centre of closed figure formed from previous step on both
23MEM7R01 CAD/CAM LAB, AM (2023-2025) 11
sides.
13. Draw circle a at centre of 6.25 mm line which are drawn vertical which meets the two lines end points. 14. With mirror command mirror draw figure with centre line of of closed figure made in previous steps. 15. Trim all the construction parts using trim commands. 16.Select features and extrude 10mm with extrude command. 17. Select colour by selecting where you want and select appearances and select the colour you want. 18. We found mass by selecting evaluate command from toolbar and selecting mass Properties and selecting units and press Enter.
RESULT:-
The figure is drawn according to the given dimensions in IPS units with density of titanium 0.0443 gm/cm3 and mass of 187.88 grams.
SKETCH 4: -
PROCEDURE :-
1. Select the units of drawing from status bar, that is millimetres (millimetre, gram, second). 2.Select any plane to draw. 3.Select sketch command for starting the sketching. 4.Draw two circles with centre at 14 mm height and 11mm width from the centre line of semi-circle on both sides of centre line with 5 mm diameter. 5.Then draw a line with 13 mm length and 30 ° angle from centre line at a distance of 8 mm to each side. Of centre line of semi-circle. 6.Draw a line with length of 48 mm below semi-circle at a distance of 3.8 mm. 7.Draw a horizontal line of 50 mm and once again a vertical line of 46 mm. 8. Draw line between two verticals of 46 mm. 9. Draw a vertical line with 30.8 mm and draw circles at end points with 3.6 diameter at at a distance of 6.6 from semi-circle centre line from the endpoint of semicircle centre line. 10. Draw tangents from two circles to make it into a complete closed figure from the end points of centre line. 11. With mirror command draw the figure drawn in steps 9 to 10 with centre line as reference line. 12. Then draw a vertical line at a distance of 6.25 mm from the centre line draw at distance of 12.8 from the centre of closed figure formed from previous step on both
23MEM7R01 CAD/CAM LAB, AM (2023-2025) 11
sides.
13. Draw circle a at centre of 6.25 mm line which are drawn vertical which meets the two lines end points. 14. With mirror command mirror draw figure with centre line of of closed figure made in previous steps. 15. Trim all the construction parts using trim commands. 16.Select features and extrude 10mm with extrude command. 17. Select colour by selecting where you want and select appearances and select the colour you want. 18. We found mass by selecting evaluate command from toolbar and selecting mass Properties and selecting units and press Enter.
RESULT:-
The figure is drawn according to the given dimensions in IPS units with density of titanium 0.0443 gm/cm3 and mass of 187.88 grams.
Similar models
grabcad
free
Hitch Pivot
... 18262.51 grams
3. convert entities of the sides by 2mm and cut two time once for the short side and another for the deeper side.
grabcad
free
Trapezoid Block
...or construction for the slots 15xr3 to lay on the constructed circle and be on the diagonal lines. cut through those slots by 10.
grabcad
free
Fork Spacer
...d click on the face of the object and use the offset entities tool and apply proper dimensions and cut then mirror like in step 3
grabcad
free
Fixture Block
...d change the dimension to 10mm.
mass: 546.82 grams
volume: 202525.07 cubic millimeters
surface area: 33680.65 square millimeters
grabcad
free
Radial Swing Block
...st i filleted the end edges.
mass = 855.12 grams
volume = 316712.23 cubic millimeters
surface area = 50473.08 square millimeters
grabcad
free
Pin Channel
...nd cut it 15mm deep. and finally, create a rectangle 35mm by 70mm, 100mm away from the top left of the figure, 15mm deep as well.
grabcad
free
Tooling cylinder
... cutting the access off and getting a half circle with a small nudge> extrude cut that by 10 and filet the inside line by 1mm.
grabcad
free
Plate
...elect the green arrow.
mass = 84184.05 grams
volume = 31179276.94 cubic millimeters
surface area = 1916449.49 square millimeters
grabcad
free
Tutorial:How to make a crane hook in pro/E.
...d u can see the finish hook profile.
note: the division of points should start from same side as per my screen shots.
thank you
grabcad
free
fin in three dimension part three
...nd points:
1. sketch 3d line for fins.
2. sketch 3d line for profile, and
3. sweep follow path revolutions as attached screenshot
Android
grabcad
free
Android
...android
grabcad
android
grabcad
free
Android
...android
grabcad
android
grabcad
free
Android
...android
grabcad
android
grabcad
free
ANDROID
...android
grabcad
android
grabcad
free
android
...android
grabcad
android
grabcad
free
Android
...android
grabcad
android
grabcad
free
Android
...android
grabcad
android
grabcad
free
Android
...android
grabcad
android
grabcad
free
Android
...android
grabcad
android
grabcad
free
Android
...android
grabcad
android
Logo
grabcad
free
LOGO
...logo
grabcad
logo
grabcad
free
logo
...logo
grabcad
logo
grabcad
free
LOGO
...logo
grabcad
logo
grabcad
free
LOGO
...logo
grabcad
logo
grabcad
free
LOGO
...logo
grabcad
logo
grabcad
free
LOGO
...logo
grabcad
logo
grabcad
free
logo
...logo
grabcad
logo
grabcad
free
Logo.
...logo.
grabcad
logo.
grabcad
free
Logo
...logo
grabcad
logo
grabcad
free
Logo
...logo
grabcad
logo