Anderson/Powerpole wall plate by taxilian

Last crawled date: 3 years ago

From the same people who brought you HamStudy.org, this is a customizable wall plate for anderson/powerpole connectors. You can make it handle as many as will fit on the single-gang plate.
For the retaining pin to hold the connectors in I use a 12AWG solid wire; usually a scrap of the copper ground wire from a romex 2+1. stick it through and then bend it at the top and bottom a bit and it works great.
IN ADDITION! This thing is crazy customizable; you can do a lot more with it if you play with it a bit. See some of the photos for examples.
Things to try:
Disable the screw holes by setting plate_screw_shank to 0
Make it all a flat plate by setting plate_depth and plate_thickness the same; optionally disable rounded corners by setting plate_corners to 0
Turn it into a panel mount powerpole block by:
setting the depth and thickness to 1 or 2
decreasing screw_distance
decreasing plate_width and plate_height to what you want
set plate_border to 0 (optional, but may help in some cases to let it be smaller)

Just about everything is customizable, allowing up to 3 boxes and whatever configuration in each of those boxes you want. I used it to create a wall plate to handle 2 3 pin connectors which I use for 24Vdc in my ham radio communications trailer, but you can do whatever you want with it.
This is licensed non-commercial. If you need a commercial license, contact me and we'll discuss terms.