Thingiverse
Among Us Crewmate (w/ "Easy Visor", hat cutout, and top/bottom keyed) by NeodymiumPhish
by Thingiverse
Last crawled date: 4 years, 10 months ago
This is a variant of Bichoveeiii's Crewmate model that includes a square peg in the top and matching square hole in the bottom, as well as a slight modification to the visor to allow clearance for the in-body bone. I'm currently in the middle of a build (8 Jan 21), but I will test this out tomorrow. Suggestions for better peg placement appreciated. I may switch to holes on top and bottom for magnet placement instead, in order to alleviate the need for supports.
20210110 Update: Having to print supports for the entire bottom edge of the "head" sucks, and the tolerances for the inside edge of the top are not wide enough to fit around the "guts" without sanding or shaving, so I'm going to make some minor modifications to provide a bit of clearance. Probably about 0.3mm, since that's what worked for my "key".
20210110 Update: Having to print supports for the entire bottom edge of the "head" sucks, and the tolerances for the inside edge of the top are not wide enough to fit around the "guts" without sanding or shaving, so I'm going to make some minor modifications to provide a bit of clearance. Probably about 0.3mm, since that's what worked for my "key".