Thingiverse
Amiga 1200 Network, 2xMicroHDMI, MicroSD by Larsih
by Thingiverse
Last crawled date: 4 years, 3 months ago
After I had bought an indivision aga mk3, I needed another output for hdmi. The solution was to use these small microhdmi connectors that I bought on ebay that are used with these nice flat cables.
I modified the back trap door with slots for 2xMicroHDMI and RJ45 network.
Also made an opening for pulling a microsd extension out of the computer (Micro SD Memory Card Slot to TF Card Extender Cable Extension)
The Micro HDMI connector socket is designed to hold the Micro HDMI Type D Female FPC Connector Socket with a flat cable. Search ebay for "Micro HDMI Type D Female FPC Connector".https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=Micro+HDMI+Type+D+Female+FPC+Connector&_sacat=0
You will also need two flat cables (FPC Flat HDMI Ribbon Cable) and two HDMI Type A male connector socket (HDMI Type A Female to FPC Connector Socket).
Recommended hdmi cable lenght is 20 cm.
Here is a package with hdmi female, male and cable:https://www.ebay.com/itm/Type-A-Male-FPC-to-CYFPV-Straight-HDMI-Female-Flat-Cable-for-HDTV-Multicopter/382598636360?ssPageName=STRK%3AMEBIDX%3AIT&var=651361237516&_trksid=p2057872.m2749.l2649
I have this as my microsd extender:https://www.ebay.com/itm/New-48cm-Micro-SD-Memory-Card-Slot-to-TF-Card-Extender-Cable-Extension-Linker/143350835120?fbclid=IwAR3ik9w-hqSHLvk9HdtTMhty98aT_yfATWckWzpXFcRqFBSjsINgOFL8SzE
I use two of this microhdmi to hdmi cable:https://www.ebay.com/itm/150cm-Micro-HDMI-Male-to-Standard-Male-Cable-Lead-Full-1080p-Tesco-HUDL-1-2-EU/162120162262?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648
Get some flat ribbon cable for the network module, and remove the top on one end or else it will be touching the floppy drive. See pictures for description.https://www.ebay.com/itm/10pcs-10pin-2-54mm-IDC-Flat-Ribbon-Cable-Wire-for-Atmel-AVR-ISP-JTAG-DownNWUSHH/303636924114?hash=item46b22bc6d2:g:DEwAAOSwfLxbEfQf
Screws: One M2x10mm for the ENC28J60 Ethernet Module LAN
The microhdmi sockets should snap into place,but you can use a drop of superglue or a glue gun to hold it extra firmly in place.
I use it on my Amiga 1200 with a Vampire 1200 accelerator and an Indivision AGA MK 3.
Use it together with my other designs to hold the sd card extender:https://www.thingiverse.com/thing:4563129
orhttps://www.thingiverse.com/thing:4578398
I modified the back trap door with slots for 2xMicroHDMI and RJ45 network.
Also made an opening for pulling a microsd extension out of the computer (Micro SD Memory Card Slot to TF Card Extender Cable Extension)
The Micro HDMI connector socket is designed to hold the Micro HDMI Type D Female FPC Connector Socket with a flat cable. Search ebay for "Micro HDMI Type D Female FPC Connector".https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=Micro+HDMI+Type+D+Female+FPC+Connector&_sacat=0
You will also need two flat cables (FPC Flat HDMI Ribbon Cable) and two HDMI Type A male connector socket (HDMI Type A Female to FPC Connector Socket).
Recommended hdmi cable lenght is 20 cm.
Here is a package with hdmi female, male and cable:https://www.ebay.com/itm/Type-A-Male-FPC-to-CYFPV-Straight-HDMI-Female-Flat-Cable-for-HDTV-Multicopter/382598636360?ssPageName=STRK%3AMEBIDX%3AIT&var=651361237516&_trksid=p2057872.m2749.l2649
I have this as my microsd extender:https://www.ebay.com/itm/New-48cm-Micro-SD-Memory-Card-Slot-to-TF-Card-Extender-Cable-Extension-Linker/143350835120?fbclid=IwAR3ik9w-hqSHLvk9HdtTMhty98aT_yfATWckWzpXFcRqFBSjsINgOFL8SzE
I use two of this microhdmi to hdmi cable:https://www.ebay.com/itm/150cm-Micro-HDMI-Male-to-Standard-Male-Cable-Lead-Full-1080p-Tesco-HUDL-1-2-EU/162120162262?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648
Get some flat ribbon cable for the network module, and remove the top on one end or else it will be touching the floppy drive. See pictures for description.https://www.ebay.com/itm/10pcs-10pin-2-54mm-IDC-Flat-Ribbon-Cable-Wire-for-Atmel-AVR-ISP-JTAG-DownNWUSHH/303636924114?hash=item46b22bc6d2:g:DEwAAOSwfLxbEfQf
Screws: One M2x10mm for the ENC28J60 Ethernet Module LAN
The microhdmi sockets should snap into place,but you can use a drop of superglue or a glue gun to hold it extra firmly in place.
I use it on my Amiga 1200 with a Vampire 1200 accelerator and an Indivision AGA MK 3.
Use it together with my other designs to hold the sd card extender:https://www.thingiverse.com/thing:4563129
orhttps://www.thingiverse.com/thing:4578398