Thingiverse
Alunar A6 i3 X Axis Belt Attachment by Skatata
by Thingiverse
Last crawled date: 4 years, 3 months ago
I wanted to replace the screw and bolt setup with something that looks a bit sturdier and easier to tension the belts as mine were fairly slack. I edited the belt attachment I found for the hesine which slotted nicely between the bearing holders on the carriages and edited the mounting holes to suit this model of i3 clone.
Still testing this out I may want to add a cover on it to prevent slipping out if the belt does so but haven't found this happening yet. A large washer on the bolt would also do the job nicely. I had to space the bolts out as they were just what I can left over from the build as to not contact with the stepper motor.
Still testing this out I may want to add a cover on it to prevent slipping out if the belt does so but haven't found this happening yet. A large washer on the bolt would also do the job nicely. I had to space the bolts out as they were just what I can left over from the build as to not contact with the stepper motor.