Thingiverse
Alps Stabilizer Insert for Dell AT101W by TimeAttackDan
by Thingiverse
Last crawled date: 4 years, 11 months ago
I have a Dell AT101W and I bought a set of blank white XDA PBT keycaps from KPrepublic Store:https://www.aliexpress.com/item/33051205362.html?spm=a2g0s.9042311.0.0.50714c4dsuk5d2
The space bar had the same cherry mounts on the space bar as the tao hai kit.
I had a set of the original stabiliser stems printed and had a few issues:
The bump in the mouth of the stem was causing issues, so I shaved it off.
The stem was too deep and allowed too much rotational slop when installed.
The slop I fixed by gluing plastic spacers in the back of the mouth of the adapter.
This is a remixed file with those issues fixed, but I don't have a 3D printer so I can't verify that it's 100% fixed but if you're installing these keycaps on an AT101W I would suggest this as a better starting point at least.
The space bar had the same cherry mounts on the space bar as the tao hai kit.
I had a set of the original stabiliser stems printed and had a few issues:
The bump in the mouth of the stem was causing issues, so I shaved it off.
The stem was too deep and allowed too much rotational slop when installed.
The slop I fixed by gluing plastic spacers in the back of the mouth of the adapter.
This is a remixed file with those issues fixed, but I don't have a 3D printer so I can't verify that it's 100% fixed but if you're installing these keycaps on an AT101W I would suggest this as a better starting point at least.