Thingiverse
Align M690L Multicopter Landing Gear Offset by jthomeo
by Thingiverse
Last crawled date: 4 years, 6 months ago
This was made to change the position of the landing gear of Align M690L Multocopter, so you can use larger batteries.
I´ve printed ABS, 0.3mm, 50% infill with support. It´s very strong in this configuration. The outer 2 holes are thinner, so you can attach the bolts without the need to drill the carbon fiber chassis plate.
Added a small space under the part to route the camera wire.
I´ve printed ABS, 0.3mm, 50% infill with support. It´s very strong in this configuration. The outer 2 holes are thinner, so you can attach the bolts without the need to drill the carbon fiber chassis plate.
Added a small space under the part to route the camera wire.