Cults
![AKG 240 MkII Repair Part](/previews/2979769.jpg)
AKG 240 MkII Repair Part
by Cults
Last crawled date: 6 years, 3 months ago
This may be useful to owners of AKG 240 MKII head phones. My headphones started to overextend (rotation) and finally, after lending them to my son, they just died. Turns out this little plastic thing inside had broken, letting the ear pads rotate freely, which in turn ripped the cables.
This is a little replacement plastic disk that I used to replace whatever plastic was there before. The phones feel like brand new. This is how to repair:
Use a tiny screwdriver or similar to lift off the cover plate (simply put the screw driver in the little opening and lift). The cover plate is the shiny round sticker thing in the middle of the ear pad with the AKG mark.
Unscrew the screw(s) (1 if R, 2 if L) and open it up.
Fix any soldering problems and unscrew and remove any plastic fragments left from the disintegrated part.
For the right side (only), screw the tiny screw into the tiny hole of the new plastic part to tap it, then remove the screw again.
Push the beams in place (use pliers if necessary (carefully) to click them into place), and put the stretchy band underneath the assembly.
Push the assembly into place (keep stretching the band), screw it down and let go of the stretch band.
Screw on the lid and put the cover plate back in place.
Done! Your headphones should feel like they are factory new again. :)
This is a little replacement plastic disk that I used to replace whatever plastic was there before. The phones feel like brand new. This is how to repair:
Use a tiny screwdriver or similar to lift off the cover plate (simply put the screw driver in the little opening and lift). The cover plate is the shiny round sticker thing in the middle of the ear pad with the AKG mark.
Unscrew the screw(s) (1 if R, 2 if L) and open it up.
Fix any soldering problems and unscrew and remove any plastic fragments left from the disintegrated part.
For the right side (only), screw the tiny screw into the tiny hole of the new plastic part to tap it, then remove the screw again.
Push the beams in place (use pliers if necessary (carefully) to click them into place), and put the stretchy band underneath the assembly.
Push the assembly into place (keep stretching the band), screw it down and let go of the stretch band.
Screw on the lid and put the cover plate back in place.
Done! Your headphones should feel like they are factory new again. :)
Similar models
cults
free
![Headphone Holder (Desk)](/t/2977784.jpg)
Headphone Holder (Desk)
... of my various akg studio head phones.
if you'd rather mount them to a wall, see:
http://cults3d.com/en/home/headphone-hook
cults
$2
![Phone holder for tripod](/t/2992471.jpg)
Phone holder for tripod
...s camera.
this allows you to take pictures or videos stably, simply place your phone on the piece and hold it with a rubber band.
cults
free
![CLASP | A Simpler Watchband](/t/2974911.jpg)
CLASP | A Simpler Watchband
...s and little sticks a thing of the past! clasp is the no fuss, print to fit watch band that makes putting on your watch a breeze!
cults
free
![Little Robin Hood](/t/2981069.jpg)
Little Robin Hood
...superglue, 3 mm bamboo skewers and an elastic band
(no screws required)
don't forget to check out my other designs, enjoy ;)
cults
free
![Surprise Egg #2 - Tiny Fork Lift](/t/2993734.jpg)
Surprise Egg #2 - Tiny Fork Lift
...itter.com/agepbiz
homepage: www.agep.biz
best regards
stian
warning: choking hazard - small parts
not for children under 3 yrs.
cults
$1
![HeadPhone](/t/2984346.jpg)
HeadPhone
...headphone
cults
headphone
created to put the high talking headphone .
cults
free
![Life Counter](/t/2988871.jpg)
Life Counter
...o fasten it). when changing it, you just pull it apart a little, turn the cogs and then the rubber band locks it in place again.
cults
free
![[Spare Part] Toy, Bolt, Screw and Nut for Workbench](/t/2985434.jpg)
[Spare Part] Toy, Bolt, Screw and Nut for Workbench
...lt (screw and nut) as a spare part. the thread is summary but it works very well.
#repair # repair #fallshutter #neplusjeter
cults
free
![Surprise Egg #5 - Tiny Fire Truck](/t/2979487.jpg)
Surprise Egg #5 - Tiny Fire Truck
...agepbiz
twitter: www.twitter.com/agepbiz
best regards
stian
warning: choking hazard - small parts
not for children under 3 yrs.
cults
free
![Surprise Egg #4 - Tiny Excavator](/t/2993644.jpg)
Surprise Egg #4 - Tiny Excavator
...agepbiz
twitter: www.twitter.com/agepbiz
best regards
stian
warning: choking hazard - small parts
not for children under 3 yrs.
Akg
cults
free
![Headphone Holder (Desk)](/t/2977784.jpg)
Headphone Holder (Desk)
...and can effortlessly handle the weight of my various akg studio head phones. if you'd rather mount them to...
cults
free
![Bracket for BNC Antenna connector](/t/2990824.jpg)
Bracket for BNC Antenna connector
...bracket for bnc antenna connector cults akg antenna antenna_holder antenna_mount bnc bracket connector microphone mounting_bracket mounting_clip...
240
cults
free
![The 10 Cent Flashlight](/t/2984472.jpg)
The 10 Cent Flashlight
...front. solder these in series and then add a 120-240 ohm resistor to make sure they don't blow out!...
cults
free
![Pentagram Vase](/t/2990768.jpg)
Pentagram Vase
...blue one is 700mm high and printed in abs 240c, nozzle 0.5mm and resolution 0.35mm. unfortunately, it deformed due...
cults
free
![XL-RCP 24.0: Camera gimbal casing for SJCAM M10 series](/t/2978781.jpg)
XL-RCP 24.0: Camera gimbal casing for SJCAM M10 series
...above problem with some extra features. http://www.supermotoxl.com/real-object-design-for-hobby-models/3d-printed-real-object-design-for-hobby- models / xl-rcp-240camera-gimbal-casing-for-sjcam-m10-series / menu-id-118.html + look "cracky" on some 3d viewer...
cults
free
![Ergonomic Grip For 3DS (original 3ds)](/t/2982265.jpg)
Ergonomic Grip For 3DS (original 3ds)
...recommend water sanding with (at least) grits 120 and 240 ...
Repair
cults
free
![Fan for repairing a 40x10mm computer fan.](/t/2992521.jpg)
Fan for repairing a 40x10mm computer fan.
...n for repairing a 40x10mm computer fan.
cults
fan for repairing a 40x10mm computer fan.
fan for repairing a 40x10mm computer fan.
cults
free
![RJ45 Repair](/t/2977172.jpg)
RJ45 Repair
...locking of the plug, clipping the accessory on the cable so that the square comes to rest on the plug in the place of broken tab.
cults
$3
![Work Glasses Repair Part (BOLLÉ)](/t/2980401.jpg)
Work Glasses Repair Part (BOLLÉ)
...n your slicer.
if you have any problem printing or mounting this model, contact me (lanpernas@icloud.com) and i will fix it.
cults
free
![Robot doll "Robotica" bust repaired](/t/2975468.jpg)
Robot doll "Robotica" bust repaired
...cults
robotica robot woman
this is the repaired bust of robotica. created by shira.
i hope it will work. i did not imprint him.
cults
$1
![kitchen 3 sink leg extention repair](/t/2980405.jpg)
kitchen 3 sink leg extention repair
...ntion repair
cults
leg extention sink kitchen
this will set under a leg that is missing the adjuster foot of a 3 compartment sink
cults
free
![Hot End repair holder](/t/2984571.jpg)
Hot End repair holder
...o need 2x m3x10mm and nuts. if you use the little bracket to hold the arduino in place, you also need a little “wood like” screw.
cults
free
![Iphone Repair Pry Tool](/t/2975352.jpg)
Iphone Repair Pry Tool
...e and like my video for more!
http://youtu.be/rj-3hyagfuy
instructions
can be printed with maker ware with no rafts or supports
cults
$12
![Repairing a Video Game Steering Wheel Fixture](/t/2982895.jpg)
Repairing a Video Game Steering Wheel Fixture
...assemble nut part screw head part a clamping knob with an insert m8 nut. the two shells also receive an m8 nut (intended housing)
cults
free
![Alexander Resculpt (Scan repair)](/t/2983097.jpg)
Alexander Resculpt (Scan repair)
... will print smoother than the original scan (and so it should at 30x the filesize! no polygons were spared at alex's expense)
cults
free
![Iron Man Bust (Repaired, flattened)](/t/2983091.jpg)
Iron Man Bust (Repaired, flattened)
...rinting time and supports. i wiped the base completely, rotated the bust a little and repaired it properly so it now slices fine.
Part
cults
free
![part for grinder](/t/2983922.jpg)
part for grinder
...part for grinder
cults
part for grinder
part for grinder
cults
free
![Motorcycle parts](/t/2982206.jpg)
Motorcycle parts
...motorcycle parts
cults
door bike camping because
parts bike rack camping car, clips + end of bike rail, caliper ....
cults
free
![Mudguard Fitting Parts](/t/2987239.jpg)
Mudguard Fitting Parts
...mudguard fitting parts
cults
mudguard fitting parts
mudguard fitting parts
cults
free
![Small Parts Box](/t/2987967.jpg)
Small Parts Box
...small parts box
cults
small parts box
small parts box
cults
free
![RoboMorphs! (Parts Compendium)](/t/2983509.jpg)
RoboMorphs! (Parts Compendium)
...robomorphs! (parts compendium)
cults
robomorphs! (parts compendium)
robomorphs! (parts compendium)
cults
free
![2-part-1](/t/2978549.jpg)
2-part-1
...2-part-1
cults
2-part-1
2-part-1
cults
free
![sencha parts tray](/t/2982642.jpg)
sencha parts tray
...sencha parts tray
cults
sencha parts tray
sencha parts tray
cults
$2
![rolling shutter part](/t/2982313.jpg)
rolling shutter part
...rolling shutter part
cults
blind wheel rolling shutter
replacement part roller shutter
cults
$9
![Facets Ring - Part 1](/t/2993505.jpg)
Facets Ring - Part 1
...facets ring - part 1
cults
facets ring - part 1
facets ring - part 1
cults
$6
![Facets Ring - Part 2](/t/2988839.jpg)
Facets Ring - Part 2
...facets ring - part 2
cults
facets ring - part 2
facets ring - part 2