Airsoft PRS stock allows batteries by full_filament

Last crawled date: 3 years, 1 month ago

ALLOWS BATTERIES AND NO MODIFICATION. This is modeled after the magpul PRS stock that will cost $245. The stock was designed for an AIRSOFT m4 based platform. With this design you will not need to have a special buffer tube, or give up having a battery. All you will need to secure it to the buffer tube is six 3mm nuts and bolts. The cheek rest and stock are adjustable by screws. The stock also has a rail at the bottom for a monopod, or the included cover to be attached. In order to use a battery it will have to be a stick type battery that fits in the buffer tube. Total it took around 44 HOURS and 42 MINUTES!!! the two longest prints are the two halves of the stock taking between 13.50-14.00 hours. Other than that everything was around the 3 hour mark. PRINT EACH SIDE (the long prints) with a BRIM so they won't break mid print.
ALL THE SMALLER FILES ARE IN THE COMMENTS FOR THOSE WITH SMALLER PRINTERS (just making the text visible and pop out not yelling)