Thingiverse
![Airsoft M249 Box Mag - V2](/previews/4732582.jpg)
Airsoft M249 Box Mag - V2
by Thingiverse
Last crawled date: 4 years, 4 months ago
This is a design for an Airsoft m249/stoner box magazine that can hold 7,000 bbs. This was designed to be low profile, so that it can hold more bbs than any stock magazine, and its feed mechanism lays on the bottom of the box, so it has been very reliable in terms of feeding. It can be wired into the trigger of the airsoft gun or use the included pressure switch. It includes two different magazine adapters so that it can be used with an m249(m4) or a stoner 96.
The 3d printed parts are used to hold the motor and gear mechanism in a surplus m249 box magazine. This design does not include a 3d printed gear.
The parts that need to be purchased are here:
MAG internal gear and motor - https://www.evike.com/products/51720/
Tube Feed Spring - https://www.evike.com/products/59003/
m249 Ammo box - https://www.venturesurplus.com/products/used-army-m249-200-round-saw-ammo-box/
I have tested printing these parts out of PLA, so far they are working well.
The 3d printed parts are used to hold the motor and gear mechanism in a surplus m249 box magazine. This design does not include a 3d printed gear.
The parts that need to be purchased are here:
MAG internal gear and motor - https://www.evike.com/products/51720/
Tube Feed Spring - https://www.evike.com/products/59003/
m249 Ammo box - https://www.venturesurplus.com/products/used-army-m249-200-round-saw-ammo-box/
I have tested printing these parts out of PLA, so far they are working well.
Similar models
thingiverse
free
![Airsoft m249 mag connector by Vodkadiller](/t/8505311.jpg)
Airsoft m249 mag connector by Vodkadiller
...airsoft m249 mag connector by vodkadiller
thingiverse
m4 stanag adapter for aeg m249 box magazine
thingiverse
free
![Airsoft Stoner Box Mag Feed Tube](/t/4807286.jpg)
Airsoft Stoner Box Mag Feed Tube
...assic army stoner because i wanted to have more than one box mag. check me out on hopup for more great designs i create and sell.
thingiverse
free
![Autofeed Airsoft mag convertor by JayTea](/t/8703332.jpg)
Autofeed Airsoft mag convertor by JayTea
...print is supposed to allow a 10 dollar ar airsoft mag to be able to auto feed bbs by pressing a button. not working at the moment
thingiverse
free
![mag box for m249 inner parts,mk46, mk48](/t/4753444.jpg)
mag box for m249 inner parts,mk46, mk48
...mag box for m249 inner parts,mk46, mk48
thingiverse
for airsoft
thingiverse
free
![Speedloader by LordApoth](/t/8120302.jpg)
Speedloader by LordApoth
...igned it to work with m4 mags so the odin adapters could be used.
things to add:
a lid to keep the bbs in
m4 variant of magholder
thingiverse
free
![PROP 9mm magazine by NX01Enterprise](/t/8672980.jpg)
PROP 9mm magazine by NX01Enterprise
...y nx01enterprise
thingiverse
this prints easily, will hold 9mm ammo that is 3d printed and i designed it for a mag pouch filler.
thingiverse
free
![GPMG / FN MAG58 / 240B 50 Round Drum Magazine Airsoft Conversion](/t/4900326.jpg)
GPMG / FN MAG58 / 240B 50 Round Drum Magazine Airsoft Conversion
...speed controller to "tune" the feed rate to your gearbox cycling rate. i tuned it to only misfire every 15 shots or so.
thingiverse
free
![BB Follower for rectangle tracks magazines by CptSkeptic](/t/8612431.jpg)
BB Follower for rectangle tracks magazines by CptSkeptic
...ck airsoft magazines. the offset bb seat pushes upwards equally and will feed all but a few bbs. works great in dusty conditions.
thingiverse
free
![Airsoft TM AA-12 Drum by DaXLR](/t/8825884.jpg)
Airsoft TM AA-12 Drum by DaXLR
...he drum and placed my button there, but you can wire it to a 3.5mm jack for example to be able to use aftermarket remote buttons.
thingiverse
free
![Airsoft spring dragunov magazine](/t/4864269.jpg)
Airsoft spring dragunov magazine
...other airsoft mag, i used the ones for vsr10. shell needs to be printed twice, one normal, and one mirrored to have entire shell.
M249
thingiverse
free
![M249 Rust by LosSimonos](/t/5033109.jpg)
M249 Rust by LosSimonos
...m249 rust by lossimonos
thingiverse
this is the original m249 from rust
thingiverse
free
![m249 para stock mount by purum](/t/8543684.jpg)
m249 para stock mount by purum
...m249 para stock mount by purum
thingiverse
stock mount for airsoft m249 para
thingiverse
free
![Airsoft m249 mag connector by Vodkadiller](/t/8505311.jpg)
Airsoft m249 mag connector by Vodkadiller
...airsoft m249 mag connector by vodkadiller
thingiverse
m4 stanag adapter for aeg m249 box magazine
thingiverse
free
![M249 Flash Hider by mr_ustas](/t/8794206.jpg)
M249 Flash Hider by mr_ustas
...m249 flash hider by mr_ustas
thingiverse
abs or pla
thingiverse
free
![M249 Front Sight Adjustment Tool by JamesFischer](/t/8550783.jpg)
M249 Front Sight Adjustment Tool by JamesFischer
...nal m249 front sight adjustment tool with the help of design team below.
design team:
ryan bounds, jesse robinson, james fischer
thingiverse
free
![7.62mm feed tray for ARES Airsoft M249 by mooklan](/t/8815629.jpg)
7.62mm feed tray for ARES Airsoft M249 by mooklan
...2mm feed tray for ares airsoft m249
need to modify the top cover for fitting/good look.
may not fit other brands of airsoft m249.
thingiverse
free
![M249 crane stock adapter by citruspers](/t/9234466.jpg)
M249 crane stock adapter by citruspers
...this in pa6+cf filament and it seems fine, but your mileage may vary and you are using this at your own risk.
.step file included
thingiverse
free
![m249 box magazine (mod1)](/t/4790355.jpg)
m249 box magazine (mod1)
...1)
thingiverse
model for replacing the standard cover m249box magazine
https://youtu.be/vxc86ycso5c
30.11.2019 spring lock added
thingiverse
free
![mag box for m249 inner parts,mk46, mk48](/t/4753444.jpg)
mag box for m249 inner parts,mk46, mk48
...mag box for m249 inner parts,mk46, mk48
thingiverse
for airsoft
Mag
thingiverse
free
![Mag holder for 6x M4 mags by DarkTech](/t/8369990.jpg)
Mag holder for 6x M4 mags by DarkTech
...mag holder for 6x m4 mags by darktech
thingiverse
magholder that fits 6x m4 mags.
thingiverse
free
![Boomtentalon Mag BOOMco Talon Mag by Boomtendo](/t/8171789.jpg)
Boomtentalon Mag BOOMco Talon Mag by Boomtendo
...boomtentalon mag boomco talon mag by boomtendo
thingiverse
talon compatible mag for cut down boomco darts
thingiverse
free
![Mag holder for 3x .308 / 7,62 mags by DarkTech](/t/8369995.jpg)
Mag holder for 3x .308 / 7,62 mags by DarkTech
...mag holder for 3x .308 / 7,62 mags by darktech
thingiverse
wall mounted mag holder for 3x .308 / 7,62 mags.
thingiverse
free
![Mag holder for 3x MP9 mags by DarkTech](/t/8369989.jpg)
Mag holder for 3x MP9 mags by DarkTech
...mag holder for 3x mp9 mags by darktech
thingiverse
wall mounted holder for mp9 mags.
a bit flimsy but it works.
thingiverse
free
![TMC mag speedloader + mag winder by ekke](/t/8547817.jpg)
TMC mag speedloader + mag winder by ekke
...ves a lid in case your bottle tips over.
works better than manual loading and im using this one myself.
my first thing upload :-)
thingiverse
free
![Mag preloader 223 Caldwell mag charger by trbrenke](/t/8199176.jpg)
Mag preloader 223 Caldwell mag charger by trbrenke
...
thingiverse
this is a preloader tray for filling the caldwell ar15 mag charger in one shot instead of a single round at a time.
thingiverse
free
![SRS Mag Rack](/t/4677990.jpg)
SRS Mag Rack
...printed this version yet, the previous version which i printed did not have the lower support on the left and mags where turning.
thingiverse
free
![KJW MK1 mag catch / mag release (for airsoft) by csakip](/t/8113474.jpg)
KJW MK1 mag catch / mag release (for airsoft) by csakip
...nded mag release / mag catch of the kjw mk1.
i filed a little bit of the inside of the pistol grip, but that might not be needed.
thingiverse
free
![MP7 Mag Rack](/t/4677998.jpg)
MP7 Mag Rack
...7 mag rack
thingiverse
this rack was designed using the mags from my tm mp7 gbb.
the rack takes 6 mags in a 2 x 3 configuration.
thingiverse
free
![M4 Mag Pouch Splitter to SMG style mags by BeardyMcWhisky](/t/9675219.jpg)
M4 Mag Pouch Splitter to SMG style mags by BeardyMcWhisky
...uches, so this will split a standard m4 pouch to carry 2xsmg style mags. you may need to scale to fit your exact pouch/mag combo.
Airsoft
thingiverse
free
![AIRSOFT by Mr_akil](/t/8684888.jpg)
AIRSOFT by Mr_akil
...airsoft by mr_akil
thingiverse
airsoft
thingiverse
free
![Flashhider Airsoft](/t/4869919.jpg)
Flashhider Airsoft
...flashhider airsoft
thingiverse
airsoft m4 flashhider
mounted @ my ares amoeba 008
thingiverse
free
![Airsoft Suppressor by KevinIhle](/t/8051379.jpg)
Airsoft Suppressor by KevinIhle
...airsoft suppressor by kevinihle
thingiverse
airsoft suppressor
thingiverse
free
![airsoft suppressor by jordan250](/t/8738433.jpg)
airsoft suppressor by jordan250
...airsoft suppressor by jordan250
thingiverse
airsoft suppressor
thingiverse
free
![Airsoft Silencer by UKnights](/t/8938211.jpg)
Airsoft Silencer by UKnights
...airsoft silencer by uknights
thingiverse
airsoft silencer
thingiverse
free
![Airsoft suppresor by 3dpoplauki](/t/8698521.jpg)
Airsoft suppresor by 3dpoplauki
...airsoft suppresor by 3dpoplauki
thingiverse
airsoft suppresor rings
thingiverse
free
![Bipod Airsoft by jakkal](/t/8817757.jpg)
Bipod Airsoft by jakkal
...bipod airsoft by jakkal
thingiverse
bipod airsoft for rails
thingiverse
free
![Airsoft Scope](/t/4831611.jpg)
Airsoft Scope
...thingiverse
this is a scope for airsoft that i am printing for my friend who does not want to spend money on an expensive scope.
thingiverse
free
![Airsoft Silencer by liqdfire](/t/9036193.jpg)
Airsoft Silencer by liqdfire
...airsoft silencer by liqdfire
thingiverse
this is a silencer designed to fit airsoft guns.
thingiverse
free
![AEG airsoft holster](/t/4870890.jpg)
AEG airsoft holster
...aeg airsoft holster
thingiverse
airsoft aeg holster for molle system or belt
V2
thingiverse
free
![Schleuder V2 / Slingshot V2 by Ju5tMak3](/t/8723280.jpg)
Schleuder V2 / Slingshot V2 by Ju5tMak3
...schleuder v2 / slingshot v2 by ju5tmak3
thingiverse
schleuder v2 / slingshot v2
have fun
thingiverse
free
![V2 by LeoRadstrom](/t/8870830.jpg)
V2 by LeoRadstrom
...v2 by leoradstrom
thingiverse
v2
thingiverse
free
![Yugioh V2](/t/4777277.jpg)
Yugioh V2
...yugioh v2
thingiverse
yugioh v2
thingiverse
free
![WOPR v2](/t/4759207.jpg)
WOPR v2
...wopr v2
thingiverse
wopr v2
from the "wargame" film
thingiverse
free
![KeyHolder V2](/t/4977634.jpg)
KeyHolder V2
...keyholder v2
thingiverse
keyholder v2.
for those who don't like to hear keys shaking.
thingiverse
free
![v2 deck by ltl20](/t/8348090.jpg)
v2 deck by ltl20
...v2 deck by ltl20
thingiverse
v2 deck
thingiverse
free
![pinquin v2 by bjarkemape](/t/8762425.jpg)
pinquin v2 by bjarkemape
...pinquin v2 by bjarkemape
thingiverse
pinquin v2
thingiverse
free
![Minion v2 by bjarkemape](/t/8762441.jpg)
Minion v2 by bjarkemape
...minion v2 by bjarkemape
thingiverse
minion v2
thingiverse
free
![LogoAlpha v2 by AlphaProject](/t/8657877.jpg)
LogoAlpha v2 by AlphaProject
...logoalpha v2 by alphaproject
thingiverse
logoalpha v2
thingiverse
free
![Arrowhead V2 by ogill117](/t/8703081.jpg)
Arrowhead V2 by ogill117
...arrowhead v2 by ogill117
thingiverse
arrowhead v2
Box
thingiverse
free
![Box with 'BOX' on it by Mooffyman13](/t/8807331.jpg)
Box with 'BOX' on it by Mooffyman13
...box with 'box' on it by mooffyman13
thingiverse
a box with 'box' on it
thingiverse
free
![Box](/t/4864127.jpg)
Box
...box
thingiverse
this is a box
thingiverse
free
![Boxes](/t/4894083.jpg)
Boxes
...boxes
thingiverse
boxes
thingiverse
free
![BOX](/t/4875700.jpg)
BOX
...box
thingiverse
box
thingiverse
free
![Box in a Box by gbob1959](/t/8634602.jpg)
Box in a Box by gbob1959
...ted it. i call it the box in a box.
the small box well not come out of the big box but you can roll the small box around in side.
thingiverse
free
![Box](/t/4759356.jpg)
Box
...box
thingiverse
box 1706060mm
thingiverse
free
![box](/t/4712168.jpg)
box
...box
thingiverse
simple box
thingiverse
free
![Box](/t/4708180.jpg)
Box
...box
thingiverse
hinged box
thingiverse
free
![Box](/t/4840476.jpg)
Box
...box
thingiverse
good box!
thingiverse
free
![Box](/t/4771694.jpg)
Box
...box
thingiverse
a box to save things