Airsoft G 17/18/19 Stand

Last crawled date: 5 years, 2 months ago

I made this as a stand to hold a airsoft glock. I've only tested it on a WE 17/18/19, it should be compatible with TM and EF airsoft glocks but haven't tested to see if they fit. The PDW is a little tight but should fit, the 19 PDW will fit with the short mag but is tight. I recommend using the med or ext mag for the PDW. The base can fit a extended mag with the base plate taken off in place for a 3d printed version but make sure it's unloaded and there isn't any bbs in the barrel. The 3d printed mags will not work and are only for the stand. For some reason the pictures are all upside down after I upload them and no matter what I do they end up that way.
Update: I tested it on a TM 17 this weekend and it was very tight. It still fit but was hard to insert and remove.