Airgun Muzzle Attachments by atooltoscream

Last crawled date: 3 years, 1 month ago

Metal muzzle brakes can be expensive. So I decided to start making some poor man's muzzle brakes for air guns.
Defend your castle with the crossbow brake.
Experience pelletception with the pellet that shoots pellets.
Put the barrett brake on and feel confident taking that starling at 1000 yards.
These brakes are meant for 7/16" or 11mm OD barrels. The holes are designed slightly undersized so the individual can sand or file to the tightness he or she prefers.
I have not printed any of these yet, so I'm not sure how well some of these will print.
I did not design the barrett attachment. I only scaled it down so it had the same hole size as the other brakes. Credit for the barrett brake goes to John Reese at GrabCAD
LINK: https://grabcad.com/library/barret-m82a1
The largest outside diameter of the blunderbuss will be about 1 inch from the top of the gun barrel, so it may inhibit aiming depending on your scope/sight setup.
I might add more designs in the future.