AIO Shifter mod, Sequential, Extensions, Knobs, H-Pattern Stiffener for Logitech by Knowpistons

Last crawled date: 5 years, 5 months ago

I wanted a shifter mod that looked good, stiffened up the shifter, and could also be transformed into a sequential shifter. I took a few of the other designs (links below) on thingiverse and molded it into this. I printed it but it needed quite a bit of post processing to work correctly, I redesigned the bottom and the top to use #4 machine screws and adjusted the tolerances, I have not printed it but it should be pretty good with minimal sanding.
These were the 2 items I used to remix.
https://www.thingiverse.com/thing:4302821https://www.thingiverse.com/thing:4419194
Tips
-Print the slider in ABS or similar filament, nylon would work best
-Everything that has over hangs needs supports
-Either flip the extension or use a brim to help adhesion