Aeon Pro Stock Attacment and Prime and add ons by fehdster85

Last crawled date: 4 years, 10 months ago

My take on the Aeon Pro stock attachment. It is meant to be used with the custom priming handle witch will eventually link together via aluminum bars with the pump grip and slide. The stock is attached by sliding the attachment over the blaster and then drilling a hole through both sides of the existing screw posts. Once the whole is cleared you can run a 1\8" x 2" screw through each hole. The matching Priming grip is attached using leftover nerf screws. The spacer for making your blaster shoot only short darts is inserted by opening the blaster and removing the breach from the plunger tube. After putting one of the extra gaskets provided with your blaster ono the spacer, and insert it into the side of the breach that connects to the plunger tube