Adjustable R/C Car Stand by overboosted1g

Last crawled date: 3 years ago

This is a custom r/c stand i designed that is adaptable to many cars and trucks. It swivels and allows you 360% of rotation. The stand was designed around the traxxas rustler but will fit many other applications. I will be designing more bolt on adapters soon so please let me know if you print this and if it works for your application. I printed this using pla at 200c for the extruder and 50c for the bed, i also used a brim but that is not necessary.To attach the sides i used some leftover m3x17 mm bolts and m3 nuts. The holes are 4mm but i found by using m3 hardware it allows you a tad bit more adjust ability. You will also notice that the top is slightly offset, that is to evenly distribute the weight from the motor and electronics in the back of the r/c vehicle.