Thingiverse
Adjustable Optical Endstop for BLV Cube
by Thingiverse
Last crawled date: 6 years, 1 month ago
Optical Endstop Mount fitting with 2020 Aluminium Slot, made for my BLV cube, 40+% infill and PETG preferred. You could glue a piece of plastic cut from 1mm thick old credit card on the pointer mount as pointer blade. I also made a blade pointer but may not fit your printer.
A M3*10 Screw and T-nut for Sensor mount.
A M4 FH Screw, must be longer than 20mm for pointer mount.
A M4 adjusting Screw Knob
A M5 by 8mm Socket Screw and T-nut for trigger mount on 2020 slot
A 20mmm Hotbed adjust spring.
Some drops of super glue for gluing plastic piece and blade mount
A M3*10 Screw and T-nut for Sensor mount.
A M4 FH Screw, must be longer than 20mm for pointer mount.
A M4 adjusting Screw Knob
A M5 by 8mm Socket Screw and T-nut for trigger mount on 2020 slot
A 20mmm Hotbed adjust spring.
Some drops of super glue for gluing plastic piece and blade mount