Adjustable Locking Leg for the Mostly Printed CNC / MultiTool by norm8332

Last crawled date: 4 years, 2 months ago

This is a replacement leg for the Mostly Printed CNC / MultiTool that allows for some finer height adjustment. It requires 2 M6X25 bolts and nuts for the locking feature. Just turn the central nut until the desired height is reached ( or level) and then tighten the bolts to lock in place and remove all looseness. The tolerances are pretty tight so your printer calibration will have to be good. I had to sand some ridges (artifacts) off the lower non-threaded portion of the bolt to allow smooth operation. Work them a bit and they fit fine. I whipped this up quickly in Sketchup. Let me know if you have any issues.