Thingiverse
Adjustable Base Case
by Thingiverse
Last crawled date: 6 years ago
This case can be used as a starting point for custom electronic cases.
The uploaded stl file is only meant to be an example. As the base case doesn't have holes for connects and cables it makes no sense to print this.
Instead use the scad file and do the following with it in OpenSCAD:
in block "Configuration"
define inner dimension of the case according to your needs
define wall thickness of the case (max 5mm)
define height of lid (min. 3.4mm)
define what to print (box, lid or both)
add further union or difference parts for box or lid to make it a useful case (good positions for that are commented in code)
After printing your case, press M3 nuts into the hex-holes of the lid and use M3 screws to connect box and lid.
The uploaded stl file is only meant to be an example. As the base case doesn't have holes for connects and cables it makes no sense to print this.
Instead use the scad file and do the following with it in OpenSCAD:
in block "Configuration"
define inner dimension of the case according to your needs
define wall thickness of the case (max 5mm)
define height of lid (min. 3.4mm)
define what to print (box, lid or both)
add further union or difference parts for box or lid to make it a useful case (good positions for that are commented in code)
After printing your case, press M3 nuts into the hex-holes of the lid and use M3 screws to connect box and lid.