Thingiverse
Adjustable alembic still stand for steam distillation by rotom
by Thingiverse
Last crawled date: 4 years, 5 months ago
Adjustable distillation stand (or something else)
The stand was made to help with steam distillation. In addition to the printed parts, it is necessary to have 3 rods ~27mm in diameter (I used concrete formwork - PVC Push Fit Cones), m4 screws and nuts. The stand is adjusted to the height with the slider (shown in the pictures), and the fine adjustment is possible with the lower plastic screws (images).
You need to print:
-Nosilec_palice 3X
-Rocaj_01 1X
-Rocaj_02 1X
-Rocaj_03 1X
-Posoda_01 1X
-Spodaj_stojalo_01 3X
-Vijak_01 3X
-Zgoraj_stojalo_01 3X
The stand was designed for 5l alembic still but I think that the stand can also be used for other alembic stills.
The stand was made to help with steam distillation. In addition to the printed parts, it is necessary to have 3 rods ~27mm in diameter (I used concrete formwork - PVC Push Fit Cones), m4 screws and nuts. The stand is adjusted to the height with the slider (shown in the pictures), and the fine adjustment is possible with the lower plastic screws (images).
You need to print:
-Nosilec_palice 3X
-Rocaj_01 1X
-Rocaj_02 1X
-Rocaj_03 1X
-Posoda_01 1X
-Spodaj_stojalo_01 3X
-Vijak_01 3X
-Zgoraj_stojalo_01 3X
The stand was designed for 5l alembic still but I think that the stand can also be used for other alembic stills.