Thingiverse
Adimlab Gantry-S X Axis Tensioner
by Thingiverse
Last crawled date: 4 years, 4 months ago
This is a remix of CR-10 X-Axis Tensioner" by donnyb99. I didn't change that much, I really liked the design and the things I changed were mainly just to make this work on the Adimlab Gantry-S printer.
The main thing I remixed was to add mount holes for the Adimlab Gantry-S. I also changed the tension screw and nut to fit M4 hardware.
To install:
Remove the two mount screws from the factory bracket. Keep these screws
Remove the hardware for the idler. Keep this hardware
Note that the hole in the pulley is offset slightly and it goes towards the back of the printer. Put the M4 x 25 or M4 x 30 screw into the pulley. Install a backing screw from the other side to keep this screw from spinning. You could also use an M4 with a bolt type hex end if you can find one.
Put the belt around the idler and install it on the pulley. Be careful of the belt orientation.
Slide the bracket onto the end of the 2020 extrusion and use the factor screws to install.
You may have to take the belt off of the x stepper for slack. Slide the pulley into the bracket. If you took the belt off of the x stepper put it back on.
Put the endcap on. Note that it only goes on one way.
Push an M4 nylock nut into the knob and screw the knob onto the tension screw.
Check everything over and adjust the belt.
Hardware needed:
2 screws to mount to the x gantry 2020 extrusion. Use the original factory screws.
Also use the original M5 screw and locknut for the idler bearing to attach it to the pulley.
M4 x 25 or M4 x 30 screw and a backing nut to keep this screw from spinning.
M4 nylock nut to insert into the knob.
.
The main thing I remixed was to add mount holes for the Adimlab Gantry-S. I also changed the tension screw and nut to fit M4 hardware.
To install:
Remove the two mount screws from the factory bracket. Keep these screws
Remove the hardware for the idler. Keep this hardware
Note that the hole in the pulley is offset slightly and it goes towards the back of the printer. Put the M4 x 25 or M4 x 30 screw into the pulley. Install a backing screw from the other side to keep this screw from spinning. You could also use an M4 with a bolt type hex end if you can find one.
Put the belt around the idler and install it on the pulley. Be careful of the belt orientation.
Slide the bracket onto the end of the 2020 extrusion and use the factor screws to install.
You may have to take the belt off of the x stepper for slack. Slide the pulley into the bracket. If you took the belt off of the x stepper put it back on.
Put the endcap on. Note that it only goes on one way.
Push an M4 nylock nut into the knob and screw the knob onto the tension screw.
Check everything over and adjust the belt.
Hardware needed:
2 screws to mount to the x gantry 2020 extrusion. Use the original factory screws.
Also use the original M5 screw and locknut for the idler bearing to attach it to the pulley.
M4 x 25 or M4 x 30 screw and a backing nut to keep this screw from spinning.
M4 nylock nut to insert into the knob.
.
Similar models
thingiverse
free
Adimlab Gantry-S Y Tensioner
... m4 nylock nut to attach the idler to the pulley assembly
2x, m4 x 10 and the original v slot nuts to mount to the 4020 extrusion
thingiverse
free
Belt tensioner pulley for Tevo Tarantula by Banholm
...e belt tensioner to 2040 extrusion with m4x10 screws and m4 t-nuts.
use the turnwheel to adjust the belt tension.
start printing!
thingiverse
free
Y belt tensioner for 2020 and 2040 aluminum extrusion by FFranzmann
...f prusa and haribo mod designs
you need to drill a hole for the m4 in your extrusion
added a version for 2020 although untested.
thingiverse
free
Ender 3 V2 Linear Rail Direct Drive X-Axis Conversion V1 by VonTaube
...
crimp belt and tension
see ender 3 v2 direct drive link below for extruder install infohttps://www.thingiverse.com/thing:4621486
thingiverse
free
X Belt tensioner for Tevo Tarantula by Banholm
...same as the y belt tensioner and has a similar design. i've tested it and it works perfectly. there's...
thingiverse
free
Prusa i3 X-Axis Tensioner by BillyKalfus1
...rew pulls the tensioner closer to the back of the axis mount, pulling the pulleys back, and increasing the tension in the x-axis.
thingiverse
free
Sintron i3 X Axis Tension kit by JWag
...der washer into the two 3mm holes on the bracket. this should increase the strength of the bracket and keep it from delaminating.
thingiverse
free
Sintron i3 X Axis End For Tension Idler by dl6lr
...tallation.
use a m5 nyloc nut and an 25mm m5 bolt with a 20teeth gt2 idler (18mm outer diameter, 9mm width, 5mm innder diameter).
thingiverse
free
CR-10 X-Axis Realigned Tensioner by jneilliii
...ion of assembly can be seen here
updates:
07/6/2017: added knob that is flipped to have the outer part larger, idea from phiippe.
thingiverse
free
Davinci 3D printer X belt tensioner by firecardenal
...h a new pulley with bearing system.
you require an m4 or m5 x 30mm screw. with two nuts, one for the knob and one for the puller.
Adimlab
thingiverse
free
ADIMlab web legs
...adimlab web legs
thingiverse
adimlab gantry web legs, assy required, glue if you want.
thingiverse
free
Adimlab gantry back brace by sRlinux
...adimlab gantry back brace by srlinux
thingiverse
a brace for the backside of the adimlab gantry.
thingiverse
free
ADIMLab Mk8 Extruder adapter
...dapter
thingiverse
this is for the commonly red replacement all aluminum extruder for the original adimlab large gantry printer.
thingiverse
free
ADIMLab Gantry Hemera Mount
...d accessories to mount the e3d hemera to the adimlab gantry. use the cooler of your choice or i have a remixed version available.
thingiverse
free
Adimlab Printer Feet Dampener by Pahls_racing
...dimlab printer feet dampener by pahls_racing
thingiverse
tpu dampeners for a adimlab 3d printer. lowered printer noise by 10 db.
thingiverse
free
ADIMLab Filament Senor Mount
...for my adimlab printer broke, and couldn't find files for it. recreated it. suggest printing it at 100% infill for strength
thingiverse
free
Adimlab Extruder Filament Guide
...that use the mk8 extruder. this was not designed by me. i'm posting this here as a convenient place to download for others.
thingiverse
free
Adimlab Filament Detector Extended
...ilament input to a location that is more inline with where 75% of your filament comes down instead of the final 10% of the spool.
thingiverse
free
ADIMLab Large Gantry Hemera Cooler Remix
...ntry hemera cooler remix
thingiverse
remix of hangtight's cooler for the hemera. made to fit my adimlab gantry hemera mount.
thingiverse
free
ADIMLab Rear Mount Spool Holder
...lder. has three holes for screws; i just used the two that came with the original mount.
printed in pla, should be +60% infill.
Gantry
turbosquid
$349
Gantry crane
...alty free 3d model gantry crane for download as ige and sldas on turbosquid: 3d models for games, architecture, videos. (1476278)
3d_export
free
firestone advertising gantry
...rs premises and<br>these advertisement gantries, were very popular in the 30-70's at grand prix races advertising tyres
turbosquid
$30
Derelict Launch Gantry
...alty free 3d model derelict launch gantry for download as fbx on turbosquid: 3d models for games, architecture, videos. (1669952)
turbosquid
$129
Gantry Crane RTG
...e 3d model gantry crane rtg for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1491933)
turbosquid
$120
Gantry stacker Assembly
...try stacker assembly for download as sldas, fbx, 3ds, and ige on turbosquid: 3d models for games, architecture, videos. (1648516)
turbosquid
$19
Train Signals Gantry
...l train signals gantry for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1462242)
turbosquid
$5
STS Gantry Crane
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$160
Bulk carrier with gantry crane
...carrier with gantry crane for download as lwo, obj, and blend on turbosquid: 3d models for games, architecture, videos. (1285258)
3d_export
$50
RMG Gantry Crane 3D Model
...t hoist rail rubber tyre tire rtg eot beam portal heigh tonne shipyard port
rmg gantry crane 3d model 5starsmodels 42860 3dexport
3d_export
$29
gantry crane
...istic model that will enhance the detail and realism of any of your rendering projects.<br>file formats: max, obj, fbx, 3ds
Tensioner
3d_export
$5
adjustable tension lock
...adjustable tension lock
3dexport
adjustable tension lock
turbosquid
$5
tension ring
...oyalty free 3d model tension ring for download as fbx and stl on turbosquid: 3d models for games, architecture, videos. (1553452)
turbosquid
$3
Tension Chair
...free 3d model tension chair for download as obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1251503)
3d_export
$5
transformador de tension
...transformador de tension
3dexport
transformador de tension entrada 460vac salida 220vac marca audax
turbosquid
$20
Motorbike Chain Tensioner
...y free 3d model motorbike chain tensioner for download as stl on turbosquid: 3d models for games, architecture, videos. (1428322)
turbosquid
$25
TENSION-WOOD-CHAIR
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
tension-bentwood-chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Tension engagement ring
...n engagement ring for download as obj, fbx, 3dm, dwg, and stl on turbosquid: 3d models for games, architecture, videos. (1491631)
3d_export
$10
Ruby Tension set Ring 3D Model
...ruby tension set ring 3d model
3dexport
tension set ruby ring in 18k
ruby tension set ring 3d model rehansheikh 25254 3dexport
turbosquid
$20
Superficial Tension Exp. Image.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Axis
3ddd
$1
Мария Axis
...
3ddd
кухня , классическая , axis
модель кухни.
3d_export
$22
Axis robot 6-axis robotic arm
...ing parts drawings, standard parts purchased parts list, can be produced directly according to the drawings, welcome to download!
3ddd
free
Versatile Axis
...ddd
nexus , плитка
http://bvtileandstone.com/ceramic-porcelain/versatile-axis/
3d_export
$19
robot 2 axis
...robot 2 axis
3dexport
robot 2 axis
turbosquid
$40
Axis R5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Axis S5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Axis Athlon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Linear Axis
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
drawing axis
...drawing axis
3dexport
simple rendering of the scene file
3ddd
$1
versatile axis ARC
...versatile axis arc
3ddd
versatile , плитка
versatile axis arc red dot design award