Adafruit NeoPixel Ring 12 Leds Fitting by FKOne

Last crawled date: 4 years, 4 months ago

This tiny fitting for theAdafruit NeoPixel ring with 12 leds allows you to screw under the neopixel ring to a surface (eg a showcase or a cabinet). the ring fitting doesn't need an enclosure or a cap. I printed the ring with pla and it worked good.
Please notice
the neopixel ring will not fall out by itself
click the ring carefully inside
to take off the ring use a thin tool an be careful not to damage the ring
there are two spacers on the sides for thin cables
best used with a m2.5 screw