Thingiverse
![AC PrintrBot LC v2 X Bridge To Bridge Support by AlexC-Makerologist](/previews/9025564.jpg)
AC PrintrBot LC v2 X Bridge To Bridge Support by AlexC-Makerologist
by Thingiverse
Last crawled date: 3 years, 1 month ago
I was finding myself having to re-tighten the X belt quite frequently on my PrintrBot LC v2, I tried upgrading to a higher quality belt with less stretch, but that only helped a little,. After looking at the design of the two bridges, I realized that mechanically what you have here is a compression bow since the belt is off set from the carriage rods. In this you have two problems, one the bot is made of wood, wood warps even when not under tension, and I could see it with the naked eye, a definite bowing of the two bridges. The second problem this generates is that the movement of the X carriage itself is tugging on the "bow" ends whenever acceleration happens along the "string"(belt) of the bow. This tugs back and forth on the two "bow" ends during printing causing little variances in the warp of the two bridges towards the belt especially at higher movement speeds. (grab a bow and pull on the string along the strings length and watch one end of the bow bend toward the center of the string and the other end of the bow loosen a bit and "de-flex" this is happening a little every time the print head accelerates,. Causing what I can only think to describe as a warble in the print finish especially at corners where acceleration shifts.
I neglected to research otherwise I would have noted that others had made various widgets to tackle this, and a chat with a local printer expert let me know that the original PrinterBot had a wood plank to help fight the bow,. (No idea why they decided to remove it in the LC, it's quite needed). Regardless I had already started working on my solution to the problem and wanted to finish what I had started.
So while this is by no means an original fix it's my take on the fix,.
Four parts (two printed):
The shoulder: Mounts behind the right bridge, Requires a 1 inch 6-32 screw, and a 6-32 square nut, 4 1.25 inch 6-32 screws (you will need to be able to cut/grind one of them to be flush with the nut), and 4 6-32 bolts. For strength & rigidity I recommend 2-3 parameters with 2 top 2 bottom solid layers. PLA is strong enough, though ABS would likely be better.
The Claw: Snaps in around the X motor, can be left loose, but there are also holes in the design to tighten the ends of the claw together with a zip tie if you wish. Two walls in all directions is plenty strong on this part.
The Rod: this can be just about any 1/4 inch diameter rod material, aluminum, carbon fiber, fiberglass, etc,. Though I would caution against wood for hopefully obvious reasons, of course wood would still be better than nothing. I choose 1/4 carbon fiber rod as its strong, light, ridged, and at my hobby shop 1/4 is the cheapest size in the ball park of what I was looking for.
The Mini Nuts: because the X belt tension thumb screws take up some space behind the right bridge when the carriage is all the way to the right and the "Shoulder" takes up some of this space you may need to change the wooden thumb screws to smaller profile plastic ones (also provided),. Though this is a good thing for another reason at least on the LC, move your carriage all the way to the left,. Look at the bottom of the bottom most thumb screw,. It's likely rubbing on the belt,.. bad,. These new mini nuts solve both problems. They will work with the stock hardware, though I suggest adding rubber washers just under the new mini nuts to keep them from loosening on their own from back and forth vibration.
You will have to disassemble a portion of your right bridge to install the shoulder, though I found it fairly easy to do especially with a power screw driver. The screw sticking out of the back of the bridge that's towards the top and closest to the extruder will need to be made flush with its nut to not impact the movement of the carriage. Do cut this prior to installation as the dremmel will heat the bolt plenty hot enough to scotch/damage wood.
The claw just uses compression to be held in place,. Push it on from the side of the motor, it should flex just enough and then snap on. Be careful of the wires that may be just under the motor.
Push the 1/4 inch rod though the shoulder hole then into the claw hole.
Add the square nut and 6-32 bolt to the shoulder.
Now I am playing with different ways of installing this, but so far, I have found that if I loosen up the belt, loosen up the two bridge plates that hold the big X rods in place, and then try to balance everything out with a caliper I can then tighten down the X rods, tighten down the new shoulder bolt while gently pushing the carbon rod towards the motor just a hair. And then last, tighten the belt, things get really, really smooth all of a sudden.
At this time I have chosen not to epoxy the new support rod at the motor claw, and iv also not zip tied the motor claw, though the holes are there to do that if you wish. So far this loose but linearly firm system is working wonders on my print quality. Though I am considering putting some kind of foam or thin padding between the motor and claw as there is a new harmonic signature coming out of the hollow carbon fiber rod,. For now im finding it somewhat novel to have this new noise, down the line ill likely remove it by lessening the possible vibrations from the loose claw either by zip tie or padding.
WARNING: I have not tested the Shoulder with the old wooden thumb screws, I fixed the belt rubbing first then designed the shoulder, I tried to give as much room as possible for the original bulky thumb screws, but I have not yet confirmed that they would not hit something on the shoulder if the carriage was all the way to the right (please let me know the results if you test this).
If your dialed in right, both printable parts should print just fine without support, even with the shoulder having a fairly large bridge to do (see photos)..
I neglected to research otherwise I would have noted that others had made various widgets to tackle this, and a chat with a local printer expert let me know that the original PrinterBot had a wood plank to help fight the bow,. (No idea why they decided to remove it in the LC, it's quite needed). Regardless I had already started working on my solution to the problem and wanted to finish what I had started.
So while this is by no means an original fix it's my take on the fix,.
Four parts (two printed):
The shoulder: Mounts behind the right bridge, Requires a 1 inch 6-32 screw, and a 6-32 square nut, 4 1.25 inch 6-32 screws (you will need to be able to cut/grind one of them to be flush with the nut), and 4 6-32 bolts. For strength & rigidity I recommend 2-3 parameters with 2 top 2 bottom solid layers. PLA is strong enough, though ABS would likely be better.
The Claw: Snaps in around the X motor, can be left loose, but there are also holes in the design to tighten the ends of the claw together with a zip tie if you wish. Two walls in all directions is plenty strong on this part.
The Rod: this can be just about any 1/4 inch diameter rod material, aluminum, carbon fiber, fiberglass, etc,. Though I would caution against wood for hopefully obvious reasons, of course wood would still be better than nothing. I choose 1/4 carbon fiber rod as its strong, light, ridged, and at my hobby shop 1/4 is the cheapest size in the ball park of what I was looking for.
The Mini Nuts: because the X belt tension thumb screws take up some space behind the right bridge when the carriage is all the way to the right and the "Shoulder" takes up some of this space you may need to change the wooden thumb screws to smaller profile plastic ones (also provided),. Though this is a good thing for another reason at least on the LC, move your carriage all the way to the left,. Look at the bottom of the bottom most thumb screw,. It's likely rubbing on the belt,.. bad,. These new mini nuts solve both problems. They will work with the stock hardware, though I suggest adding rubber washers just under the new mini nuts to keep them from loosening on their own from back and forth vibration.
You will have to disassemble a portion of your right bridge to install the shoulder, though I found it fairly easy to do especially with a power screw driver. The screw sticking out of the back of the bridge that's towards the top and closest to the extruder will need to be made flush with its nut to not impact the movement of the carriage. Do cut this prior to installation as the dremmel will heat the bolt plenty hot enough to scotch/damage wood.
The claw just uses compression to be held in place,. Push it on from the side of the motor, it should flex just enough and then snap on. Be careful of the wires that may be just under the motor.
Push the 1/4 inch rod though the shoulder hole then into the claw hole.
Add the square nut and 6-32 bolt to the shoulder.
Now I am playing with different ways of installing this, but so far, I have found that if I loosen up the belt, loosen up the two bridge plates that hold the big X rods in place, and then try to balance everything out with a caliper I can then tighten down the X rods, tighten down the new shoulder bolt while gently pushing the carbon rod towards the motor just a hair. And then last, tighten the belt, things get really, really smooth all of a sudden.
At this time I have chosen not to epoxy the new support rod at the motor claw, and iv also not zip tied the motor claw, though the holes are there to do that if you wish. So far this loose but linearly firm system is working wonders on my print quality. Though I am considering putting some kind of foam or thin padding between the motor and claw as there is a new harmonic signature coming out of the hollow carbon fiber rod,. For now im finding it somewhat novel to have this new noise, down the line ill likely remove it by lessening the possible vibrations from the loose claw either by zip tie or padding.
WARNING: I have not tested the Shoulder with the old wooden thumb screws, I fixed the belt rubbing first then designed the shoulder, I tried to give as much room as possible for the original bulky thumb screws, but I have not yet confirmed that they would not hit something on the shoulder if the carriage was all the way to the right (please let me know the results if you test this).
If your dialed in right, both printable parts should print just fine without support, even with the shoulder having a fairly large bridge to do (see photos)..
Similar models
3dwarehouse
free
![Diddley Bow](/t/9995310.jpg)
Diddley Bow
...uner/tightener. #bo_diddley #bow #bridge #diddley #guitar #instrument #jar #nails #nut #single #slide #spoon #string #wedge #wood
thingiverse
free
![Rostock Carriage Igus/Traxxas - Alternative mounting by zeus](/t/8972234.jpg)
Rostock Carriage Igus/Traxxas - Alternative mounting by zeus
...he belt is tighten properly, it will pull the screws outwards a bit and loosening itself, even with washers and if screwed tight!
thingiverse
free
![Solidoodle Replacement Extruder Thumb nut by Wompus](/t/9029954.jpg)
Solidoodle Replacement Extruder Thumb nut by Wompus
...e one of the screws from the y-motor, place it in your drill and go at the nut a couple of times. it should loosen up right away.
thingiverse
free
![Replicator X Belt tension tool by Roboduck](/t/8995301.jpg)
Replicator X Belt tension tool by Roboduck
...the motor and adjust the thumb screws until the desired tension has been achieved. tighten your motor screws and remove the tool.
thingiverse
free
![Belt Tensioner - Idle Pulley for Prusa Mendel I2 by Chris918](/t/9005590.jpg)
Belt Tensioner - Idle Pulley for Prusa Mendel I2 by Chris918
... old 608 bearing idler on the frame's threaded rod. it is acting as a washer on one side between the nut and the tensioner ;)
thingiverse
free
![New Y clamp for hypercube evo (tension release) by zjxlsti](/t/8649176.jpg)
New Y clamp for hypercube evo (tension release) by zjxlsti
... am talking about, and confident about your x gantry set up (both x rods tightened so no force is transferred to your y bearings)
thingiverse
free
![TronXY X8 X Carriage Belt Tension Mod by duodreamer](/t/8587172.jpg)
TronXY X8 X Carriage Belt Tension Mod by duodreamer
...rriage, plus two long m3 screws with nuts. can also use a smaller (625) bearing if you want and if your belt needs the clearance.
thingiverse
free
![Da Vinci Y-Axis Carriage by mfink70](/t/8571835.jpg)
Da Vinci Y-Axis Carriage by mfink70
.... pictures are shown above.
added an additional version (motor side y-carriage) with hole to access rear upper motor mount screw.
thingiverse
free
![P3Steel Y carriage belt holder by kaspars](/t/8251033.jpg)
P3Steel Y carriage belt holder by kaspars
...tion enabled)
30% rectilinear infill
update:
added v2 version with a cutout, if you have a y carriage with two center bed screws.
thingiverse
free
![Sidewinder X1 Y Belt Tensioner by cybrstorm](/t/8015754.jpg)
Sidewinder X1 Y Belt Tensioner by cybrstorm
...crews use the same thread size, so are interchangeable if you like one over the other.
please feel free to remix and make better!
Makerologist
thingiverse
free
![3D Printed & Laser Cut, Lil-CNC Mill ACv2 by AlexC-Makerologist](/t/630207.jpg)
3D Printed & Laser Cut, Lil-CNC Mill ACv2 by AlexC-Makerologist
...p://www.ebay.com/usr/myopen3d
for more detail check out the instructable @ http://www.instructables.com/id/3d-printed-cnc-mill/
thingiverse
free
![Donkey Car Dog Bone by AlexC-Makerologist](/t/8315330.jpg)
Donkey Car Dog Bone by AlexC-Makerologist
...pendicular, i have been tinkering with heating the dogbone with a hot air gun and then carefully twisting over the entire length.
thingiverse
free
![MyOpen3D - Geodesic Dome Kit by AlexC-Makerologist](/t/8651328.jpg)
MyOpen3D - Geodesic Dome Kit by AlexC-Makerologist
...on #educationaltoys #toys #stem #steam #tech #opensource #openhardware #engineering #prototyping #seattlemakers #pnw #geekgirlcon
thingiverse
free
![MO3D Octagonal Candle Holder by AlexC-Makerologist](/t/8609315.jpg)
MO3D Octagonal Candle Holder by AlexC-Makerologist
...yopen3d!
https://www.myopen3d.comhttps://www.facebook.com/myopen3dhttps://www.instagram.com/myopen3d/https://twitter.com/myopen3d
thingiverse
free
![MyOpen3D - Desktop Guardian v1.0 by AlexC-Makerologist](/t/8657487.jpg)
MyOpen3D - Desktop Guardian v1.0 by AlexC-Makerologist
...neering!
https://www.myopen3d.comhttps://www.facebook.com/myopen3dhttps://www.instagram.com/myopen3d/https://twitter.com/myopen3d
thingiverse
free
![MyOpen3D - TACO i3+ 3d Printer v1.0 by AlexC-Makerologist](/t/8656827.jpg)
MyOpen3D - TACO i3+ 3d Printer v1.0 by AlexC-Makerologist
...neering!
https://www.myopen3d.comhttps://www.facebook.com/myopen3dhttps://www.instagram.com/myopen3d/https://twitter.com/myopen3d
thingiverse
free
![Makerologist Roboderby (donkey car mods) by AlexC-Makerologist](/t/8521059.jpg)
Makerologist Roboderby (donkey car mods) by AlexC-Makerologist
...esigned to hold the car up during calibration (designed for 2.7mm door skin).
http://www.makerologist.comhttps://www.myopen3d.com
thingiverse
free
![MyOpen3D Fidget Spinner Collection by AlexC-Makerologist](/t/8694575.jpg)
MyOpen3D Fidget Spinner Collection by AlexC-Makerologist
...spin.
all of the spinners in the photographs where printed on a myopen3d seattle prusa i3+ 3d printer. https://www.myopen3d.com/
thingiverse
free
![Snap-together Cam Set for Strandbeest by AlexC-Makerologist](/t/8679508.jpg)
Snap-together Cam Set for Strandbeest by AlexC-Makerologist
...his will help with the camshaft rigidity by reducing flex, which in turn makes the walker's movement more precise and smooth.
thingiverse
free
![AC Twist On Cable Loops For 20mm Extrusion by AlexC-Makerologist](/t/9014041.jpg)
AC Twist On Cable Loops For 20mm Extrusion by AlexC-Makerologist
... (on 20 mm extrusion), and unlike zip ties these are re-usable!
print with 2-3 perimeters for best strength.
4 sizes included
Alexc
thingiverse
free
![3D Printed & Laser Cut, Lil-CNC Mill ACv2 by AlexC-Makerologist](/t/630207.jpg)
3D Printed & Laser Cut, Lil-CNC Mill ACv2 by AlexC-Makerologist
...p://www.ebay.com/usr/myopen3d
for more detail check out the instructable @ http://www.instructables.com/id/3d-printed-cnc-mill/
thingiverse
free
![Donkey Car Dog Bone by AlexC-Makerologist](/t/8315330.jpg)
Donkey Car Dog Bone by AlexC-Makerologist
...pendicular, i have been tinkering with heating the dogbone with a hot air gun and then carefully twisting over the entire length.
thingiverse
free
![MyOpen3D - Geodesic Dome Kit by AlexC-Makerologist](/t/8651328.jpg)
MyOpen3D - Geodesic Dome Kit by AlexC-Makerologist
...on #educationaltoys #toys #stem #steam #tech #opensource #openhardware #engineering #prototyping #seattlemakers #pnw #geekgirlcon
thingiverse
free
![MO3D Octagonal Candle Holder by AlexC-Makerologist](/t/8609315.jpg)
MO3D Octagonal Candle Holder by AlexC-Makerologist
...yopen3d!
https://www.myopen3d.comhttps://www.facebook.com/myopen3dhttps://www.instagram.com/myopen3d/https://twitter.com/myopen3d
thingiverse
free
![MyOpen3D - Desktop Guardian v1.0 by AlexC-Makerologist](/t/8657487.jpg)
MyOpen3D - Desktop Guardian v1.0 by AlexC-Makerologist
...neering!
https://www.myopen3d.comhttps://www.facebook.com/myopen3dhttps://www.instagram.com/myopen3d/https://twitter.com/myopen3d
thingiverse
free
![MyOpen3D - TACO i3+ 3d Printer v1.0 by AlexC-Makerologist](/t/8656827.jpg)
MyOpen3D - TACO i3+ 3d Printer v1.0 by AlexC-Makerologist
...neering!
https://www.myopen3d.comhttps://www.facebook.com/myopen3dhttps://www.instagram.com/myopen3d/https://twitter.com/myopen3d
thingiverse
free
![Makerologist Roboderby (donkey car mods) by AlexC-Makerologist](/t/8521059.jpg)
Makerologist Roboderby (donkey car mods) by AlexC-Makerologist
...esigned to hold the car up during calibration (designed for 2.7mm door skin).
http://www.makerologist.comhttps://www.myopen3d.com
thingiverse
free
![MyOpen3D Fidget Spinner Collection by AlexC-Makerologist](/t/8694575.jpg)
MyOpen3D Fidget Spinner Collection by AlexC-Makerologist
...spin.
all of the spinners in the photographs where printed on a myopen3d seattle prusa i3+ 3d printer. https://www.myopen3d.com/
thingiverse
free
![Snap-together Cam Set for Strandbeest by AlexC-Makerologist](/t/8679508.jpg)
Snap-together Cam Set for Strandbeest by AlexC-Makerologist
...his will help with the camshaft rigidity by reducing flex, which in turn makes the walker's movement more precise and smooth.
thingiverse
free
![AC Twist On Cable Loops For 20mm Extrusion by AlexC-Makerologist](/t/9014041.jpg)
AC Twist On Cable Loops For 20mm Extrusion by AlexC-Makerologist
... (on 20 mm extrusion), and unlike zip ties these are re-usable!
print with 2-3 perimeters for best strength.
4 sizes included
Lc
cg_studio
$129
![Lexus LC500 20173d model](/t/993287.jpg)
Lexus LC500 20173d model
...c-500
.max .lwo .fbx .c4d .3ds .obj - lexus lc500 2017 3d model, royalty free license available, instant download after purchase.
3ddd
$1
![Le Corbusier — LC](/t/978299.jpg)
Le Corbusier — LC
...ополигональная модель кресла. текстурные координаты присвоены, текстуры в архиве.модель проверена на отсутствие ошибок геометрии.
3ddd
$1
![Recliner LC 4 le corbusier](/t/602222.jpg)
Recliner LC 4 le corbusier
...одержит фай fbx;
_________________
габаритные размеры:
длина (length): 1600 мм;
ширина (width):570 мм;
высота (height) 670 мм;
3d_ocean
$85
![Dodge Challenger RT Scat Pack LC 2015](/t/563095.jpg)
Dodge Challenger RT Scat Pack LC 2015
...at pack lc 2015 with high detail. dodge challenger – a cult car manufactured by dodge, owned concern chrysler corporation. was...
3d_ocean
$89
![Lexus LF-LC 2012](/t/565908.jpg)
Lexus LF-LC 2012
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3d_ocean
$85
![Dodge Challenger SRT Helllcat Supercharged LC 2015](/t/570514.jpg)
Dodge Challenger SRT Helllcat Supercharged LC 2015
...elllcat supercharged lc 2015 with high detail. dodge challenger – a cult car manufactured by dodge, owned concern chrysler cor...
3d_ocean
$85
![Dodge Challenger RT LC 2015](/t/577250.jpg)
Dodge Challenger RT LC 2015
... 2015 with high detail. dodge challenger – a cult car manufactured by dodge, owned concern chrysler corporation. was designed ...
3d_ocean
$85
![Dodge Challenger RT Classic LC 2015](/t/558040.jpg)
Dodge Challenger RT Classic LC 2015
...assic lc 2015 with high detail. dodge challenger – a cult car manufactured by dodge, owned concern chrysler corporation. was d...
3d_ocean
$85
![Dodge Challenger RT Shaker LC 2015](/t/572779.jpg)
Dodge Challenger RT Shaker LC 2015
...aker lc 2015 with high detail. dodge challenger – a cult car manufactured by dodge, owned concern chrysler corporation. was de...
3d_ocean
$85
![Dodge Challenger TA Concept LC 2014](/t/586367.jpg)
Dodge Challenger TA Concept LC 2014
...ncept lc 2014 with high detail. dodge challenger – a cult car manufactured by dodge, owned concern chrysler corporation. was d...
Printrbot
thingiverse
free
![Printrbot Simple Metal 18mm probe holder by nomath4u](/t/8145126.jpg)
Printrbot Simple Metal 18mm probe holder by nomath4u
...re to update the z-probe offset setting in marlin. my best settings are working with this offset 55mm on the side and that is it.
thingiverse
free
![Printrbot Simple Metal Remix of Hybrid Modular Spool Roller by PearlGreyMusic by FossilFolk](/t/8142724.jpg)
Printrbot Simple Metal Remix of Hybrid Modular Spool Roller by PearlGreyMusic by FossilFolk
...it works great and i like that it's easy to apply just a bit of pressure to the spool to prevent it from unreeling mid print.
thingiverse
free
![Godzilla Japanese Printable Embellishments for Fun and Profit! by SpaceMonkeyBoom](/t/8066156.jpg)
Godzilla Japanese Printable Embellishments for Fun and Profit! by SpaceMonkeyBoom
...for a magic deck box. printed on an old printrbot 1405....
thingiverse
free
![Fan Shroud For Printrbot Simple Pro and Plus Metal by Swood333](/t/8088630.jpg)
Fan Shroud For Printrbot Simple Pro and Plus Metal by Swood333
...e.
for best results print with the overhangs oriented towards your greatest cooling and set your extrusion width slightly higher.
thingiverse
free
![Echo Show 8 Monitor Stand All In One by XtremeDesignz3](/t/8183116.jpg)
Echo Show 8 Monitor Stand All In One by XtremeDesignz3
...sit on top of your computer monitor. printed on printrbot play with extended y axis and heated bed. print...
thingiverse
free
![Printrbot Simple Metal USB Cable Fix and Protector by jsmith24](/t/8188814.jpg)
Printrbot Simple Metal USB Cable Fix and Protector by jsmith24
... that was the easiest way to get it straight.
now just plug the right angle cable into the usb extension and you're all set.
thingiverse
free
![Printrbot Simple Metal BLTouch Mount by jtyphoid](/t/8172504.jpg)
Printrbot Simple Metal BLTouch Mount by jtyphoid
...t on.
as with slipjig's version, you will need to cut off the round hoop that is used to mount the original inductive sensor.
thingiverse
free
![Durr Burger (Fortnite) by Quinventor](/t/8294205.jpg)
Durr Burger (Fortnite) by Quinventor
...: https://www.banggood.com/shock-absorber-stepper-motor-vibration-damper-for-3d-printer-nema17-stepper-motor-p-1310737.html?p=15141623958485201808 running low on filament get some here: https://www.banggood.com/anet-1kg-1_75mm-3d-printer-pla-filament-for-makerbot-mendel-printrbotreprap-prusa-p-992424.html?p=15141623958485201808 need more storage for all of those complex prints...
thingiverse
free
![Helicoptrahedron Puzzle by RyanPuzzle](/t/8298083.jpg)
Helicoptrahedron Puzzle by RyanPuzzle
...zanden's curvy copter. this puzzle was printed on a printrbot simple metal in black pla, then sanded and polished....
thingiverse
free
![Huge Cheap Home CNC (#hchcnc) by Enic](/t/8293350.jpg)
Huge Cheap Home CNC (#hchcnc) by Enic
...threaded rod coupling) https://www.thingiverse.com/thing:1329750 thanks to lorenzo aspesi https://www.thingiverse.com/aspesilorenzo/about printrbot simple metal gt2 belt cliphttps://www.thingiverse.com/thing:746423 thanks to spanner hands...
Ac
3d_export
$33
![Compact Fluorescent Bulb 3D Model](/t/290415.jpg)
Compact Fluorescent Bulb 3D Model
...rt
compact fluorescent bulb cfl incandescent lamp light ac dc luminous
compact fluorescent bulb 3d model plutonius 33028 3dexport
3d_export
$49
![Samsung Galaxy Ace Style Dark Gray 3D Model](/t/860200.jpg)
Samsung Galaxy Ace Style Dark Gray 3D Model
... touch
samsung galaxy ace style dark gray 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl humster3d 112625 3dexport
cg_studio
$25
![Ac Milan Football Black3d model](/t/959540.jpg)
Ac Milan Football Black3d model
... acmilan
.max .obj .fbx .3ds - ac milan football black 3d model, royalty free license available, instant download after purchase.
cg_studio
$25
![Ac Milan Football Brown3d model](/t/960705.jpg)
Ac Milan Football Brown3d model
... acmilan
.obj .fbx .3ds .max - ac milan football brown 3d model, royalty free license available, instant download after purchase.
3ddd
$1
!["APT2B" KINGSWELL ACE COFFEE TABLE](/t/1000690.jpg)
"APT2B" KINGSWELL ACE COFFEE TABLE
...ый
журнальный столик "apt2b" kingswell acehttp://www.apt2b.com/furniture/tv-stands/kingswell-ace-coffee-table
3ddd
$1
![B&B Italia / Ac Lounge Sofa](/t/1002761.jpg)
B&B Italia / Ac Lounge Sofa
...b&b italia / ac lounge sofa
3ddd
b&b italia
ac lounge sofa - high poly model
3ddd
$1
![Диван Fine Home Bella Shabby](/t/1000231.jpg)
Диван Fine Home Bella Shabby
...turbosmooth-2 ) unwrap развёртка. материалы и текстуры присутствуют. сайт производителя:http://www.dynamichomedecor.com/element-bel-2pc-lafchr-acrafchr-so-sand-7.html ...
3ddd
$1
![Modular Medard](/t/992961.jpg)
Modular Medard
...socket gu10 (ø50) dimmable no orientable yes voltage 230v ac ...
3ddd
$1
![Ceiling Panels](/t/992966.jpg)
Ceiling Panels
...panel) with pin light, suspended light, cctv & circular ac supply and return. the model is editable with material...
3ddd
$1
![RY-AC Royal](/t/973125.jpg)
RY-AC Royal
...ry-ac royal
3ddd
стул
кресло ry-ac royal производства малазии
Bridge
3d_export
$30
![Pontoon 3D Model](/t/290239.jpg)
Pontoon 3D Model
...pontoon 3d model 3dexport pontoon bridge wood docks dock marine port lake sea ocean pontoon...
3d_export
$95
![Starship Bridge Command Center 3D Model](/t/290356.jpg)
Starship Bridge Command Center 3D Model
...d center bridge panel control console future futuristic captain
starship bridge command center 3d model fattypants 32726 3dexport
3d_export
$6
![Bridge 3D Model](/t/291143.jpg)
Bridge 3D Model
...bridge 3d model
3dexport
bridge 3d model yevgen 65203 3dexport
3ddd
$1
![Стул ISO](/t/864605.jpg)
Стул ISO
...iso 3ddd iso , ligne roset стул iso размеры: bridge w 51,5 d 52 back height 81 seat height...
3d_ocean
$12
![Gothic Style Window 02](/t/862048.jpg)
Gothic Style Window 02
...design inspired by the gothic architecture of london tower bridge fine details and ancient stone material add much more...
3d_ocean
$12
![Gothic Style Window 04](/t/862052.jpg)
Gothic Style Window 04
...design inspired by the gothic architecture of london tower bridge fine details and ancient stone material add much more...
3d_ocean
$17
![Low Poly Forest Cottage](/t/862152.jpg)
Low Poly Forest Cottage
...low poly forest cottage 3docean bridge cottage fire forest green house landscape nature pine water...
3d_export
$6
![Bricks wall 3D 3D Model](/t/859422.jpg)
Bricks wall 3D 3D Model
...stones old paving wall rock bricks brick building factory bridge medieval decorative stone italy flag masonry blue bricks wall...
3d_export
$6
![Masonry 3D Model](/t/859436.jpg)
Masonry 3D Model
...stones old paving wall rock bricks brick building factory bridge medieval decorative stone masonry mosaic travertine flooring ceiling sandstone...
3d_export
$6
![Masonry 3D 3D Model](/t/859443.jpg)
Masonry 3D 3D Model
...stones old paving wall rock bricks brick building factory bridge medieval decorative stone masonry mosaic travertine flooring ceiling sandstone...
V2
3d_export
$69
![Female 01 3dpeople vol 02 v2 3D Model](/t/288756.jpg)
Female 01 3dpeople vol 02 v2 3D Model
...3d model
3dexport
female 3dpeople woman human body t-pose clothes
female 01 3dpeople vol 02 v2 3d model evermotion 82503 3dexport
3d_ocean
$9
![HDRI Morning SunSet V2](/t/862293.jpg)
HDRI Morning SunSet V2
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4128×2083 pixels. it is 32 bit color.
3d_ocean
$9
![HDRI Sunset V2](/t/862549.jpg)
HDRI Sunset V2
...jects. format: this file is in the following formats: hdr exr jpg resolution: this file is 10000×2500 pixels. it is 32 bit color.
3d_export
$10
![Locker V2 3D Model](/t/860227.jpg)
Locker V2 3D Model
...al padlock indoor security middle
locker v2 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl firdz3d 113155 3dexport
3d_ocean
$15
![Element3D - iPhone 6S](/t/860316.jpg)
Element3D - iPhone 6S
...apple’s iphone 6s model collection for video copilot’s element3d v2 in all 4 color...
3d_ocean
$12
![Fest Amsterdam Windlicht Tangare Lantern v2](/t/860351.jpg)
Fest Amsterdam Windlicht Tangare Lantern v2
...m. it was modeled and prepared for photorealistic renderings, close-ups, cg visualization. the lantern model is ready to be in...
3d_ocean
$49
![HDRI Collection V2](/t/860372.jpg)
HDRI Collection V2
...kydome sun
12 hdri collection .hdr, exr, jpg format for use as environment in 3d scenes. resolution: each sky hdri is 4000px wide
cg_studio
$49
![Old Man v23d model](/t/959311.jpg)
Old Man v23d model
...cter people topology polygroups
.ztl .obj - old man v2 3d model, royalty free license available, instant download after purchase.
cg_studio
$79
![Female Anatomy v23d model](/t/960701.jpg)
Female Anatomy v23d model
...ence polygroups basemesh
.obj .ztl - female anatomy v2 3d model, royalty free license available, instant download after purchase.
3ddd
$1
![Стена из листьев плюща v2](/t/1000172.jpg)
Стена из листьев плюща v2
... примерный размер: 2500*5000мм
max2011+fbx
1,863,372 - polys
1,205,024 - verts
пойдет как для экстерьера так и для интерьера.
Support
3d_export
$12
![Walking Canes 3D Model](/t/290326.jpg)
Walking Canes 3D Model
...canes cane stick sticks assistive crutch crutches hiking camping support disabled staff aid balancing trekking poles gentlemen classic old...
3d_export
$50
![Fast Food Restaraunt Set 3D Model](/t/290393.jpg)
Fast Food Restaraunt Set 3D Model
...restaraunt 3d models tables chair seats pan tray bottles support boxes interiors furniture fast food restaraunt set 3d model...
3ddd
$1
![Neverending Glory](/t/864153.jpg)
Neverending Glory
...the leadership of mozart himself. through this collection avid supportrs and lovers of stories and simplicity can acquire a...
3d_ocean
$2
![Grassydirt](/t/862240.jpg)
Grassydirt
...2k dirt grassy ground textures grassydirt cg textures tileable support include : normal map + specular...
3d_ocean
$2
![Deadgrass](/t/862252.jpg)
Deadgrass
...dead? i hope you come back to life! tileable supportd! have any problem? contact...
3d_ocean
$7
![Substance Textures 2-Pack](/t/862390.jpg)
Substance Textures 2-Pack
...need to open them in unity, unreal, any other supportd game engine or substance designer itself) create hundreds of...
3d_export
$10
![Bookend 3D Model](/t/859638.jpg)
Bookend 3D Model
...bookend 3d model 3dexport bookend support books end bookshelf library sheetmetal metal home decor decoration...
3d_ocean
$2
![Cementwall](/t/860327.jpg)
Cementwall
...be careful! , cement walls were very sharp! tileable support have any problem? contact...
3ddd
$1
![LEMA 3-POD](/t/959982.jpg)
LEMA 3-POD
...tripod: a continuous symbol in chrome plated steel which support a plane—rectangular, round or drop-shaped in glass, wood, or...
3ddd
$1
![Flexform Mood Drop](/t/960067.jpg)
Flexform Mood Drop
...by felxform/mood from drop collection. quad single model mesh. support ...