Thingiverse
AC Exhaust Hose Adapter (e.g. Comfee Midea compatible) by docb7
by Thingiverse
Last crawled date: 4 years, 6 months ago
I wanted to rebuild my Comfee AC as a dual duct system. So I used this here:https://www.thingiverse.com/thing:4545948
But to fit in an 15cm duct and just had the one original Midea/comfee hose, I wanted to cut the original hose into two peaces and therefore needed the proper "end" piece (Comfee Schlauch.stl). On the other hand, I needed the fitting for the nice adapter mentioned above - so I designed Comfee Schlauch_Adapter_ring.stl.
For both things I used support enforcers (should be in 3mf files) or feel free to add them yourself ;-)
But to fit in an 15cm duct and just had the one original Midea/comfee hose, I wanted to cut the original hose into two peaces and therefore needed the proper "end" piece (Comfee Schlauch.stl). On the other hand, I needed the fitting for the nice adapter mentioned above - so I designed Comfee Schlauch_Adapter_ring.stl.
For both things I used support enforcers (should be in 3mf files) or feel free to add them yourself ;-)