Thingiverse
A10M SKR 1.3/1.4/1.4 Turbo Case by Spydyr
by Thingiverse
Last crawled date: 4 years, 11 months ago
Couldn't find a case I liked so I designed a front mount. Stock case cooling fan has been replaced by a 5015 blower and is positioned to blow straight across the drivers. This does extend under the Y axis rail and because the lid is also "pinned" you have to attach the lid before attaching the printer. The case is big and must be printed at an angle or with a larger printer.
Recommended to form all your threads before attaching mainboard, fan, and lid. You will need 6 M3x10mm screws for the lid and 2 M3x20mm screws for the blower fan.
Be careful removing supports in the fan area. The lower front section can split because of thin wall from the fan notch. While I thought about reinforcing this I decided against it and it is not a critical feature.
STEP files are included for your own lid customizations and for changing the fan to something else if you want.
9.20.2020 Added WiFi slot for ESP-01S as an option.
Recommended to form all your threads before attaching mainboard, fan, and lid. You will need 6 M3x10mm screws for the lid and 2 M3x20mm screws for the blower fan.
Be careful removing supports in the fan area. The lower front section can split because of thin wall from the fan notch. While I thought about reinforcing this I decided against it and it is not a critical feature.
STEP files are included for your own lid customizations and for changing the fan to something else if you want.
9.20.2020 Added WiFi slot for ESP-01S as an option.