A-10 Thunderbolt by atamerica

Last crawled date: 4 years, 7 months ago

I update and fix this.
This is the final, I will upload the result of the print soon.
There are 3 parts.
Slicer using CURA.
Top part : no need support - Print Regular
Middle part : need support.
Wall thickness : 2 mm
Infil : 100%
Support :
Touching Buildplate
Support Overhang Angle : 80 degree
Support Pattern : Zigzag
Support Density : 15%
Use Tower (Check)
Build Plate Adhesion : none
Back Part : no need support.
Infill : 100%
PLA.