Welding fumes aspirator box 3d model
Warning. This content is not moderated and could be offensive.
smoke
3dmdb logo
GrabCAD
Welding fumes aspirator box

Welding fumes aspirator box

by GrabCAD
Last crawled date: 1 year, 9 months ago
When you tin soldering for electronics, toxic fumes are formed, for this reason I have thought about making a mini fume extractor channeling the smoke out through a normal hose for irrigation. You can use a filter too

Quando si fanno saldature a stagno per elettronica si formano dei fumi tossici, per questo motivo ho pensato di realizzare un mini aspiratore di fumi per convogliare il fumo fuori tramite un normale tubo per irrigazione. Volendo si può interporre anche un filtro.

Here you can unload the complete fumes extractor but without the accessories (base with power supply and air discharge adapters.
To download all the elements (fumes extractor and accessories) go to https://www.redpah.com/profile/16098/sergio-lanna

Qui potete scaricare l'aspiratore completo ma senza gli accessori (base con alimentatore e adattatori per scarico aria.
Per scaricare tutti gli elementi (Aspiratore e accessori) vai al sito https://www.redpah.com/profile/16098/sergio-lanna

Items to buy (Elementi da acquistare):
Fan (Ventola) 12Vdc 2700 rpm 10,7 CFM 75x75x30mm
https://it.aliexpress.com/item/75mmx30mm-DC-12V-0-24A-2-Pin-Computer-PC-Sleeve-Bearing-Blower-Coolin...

Power supply (Alimentatore) 220Vac - 12Vcc 1A stabilizzato.
https://www.amazon.it/gp/product/B01INC3PQC/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Bipolar switch (Interruttore bipolare).
https://www.amazon.it/SODIAL-posizioni-Barca-Interruttori-bilancere/dp/B00IIDYBDS/ref=sr_1_5?ie=UTF8...

Two-pin connector for board (Connettore a due pin da basetta).
https://www.amazon.it/gp/product/B01MY8FLMV/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Cable 220Vac with plug (Cavo 220Vca con spina)

Screws (viti e bulloni)

Irrigation hose
You can use 4 types of tube using the appropriate adapter:
1 "= 25mm
3/4 "= 19mm
5/8 "= 15mm
1/2 "= 12.5mm

Tubo per irrigazione
Puoi usare 4 tipi di tubo usando l'apposito adattatore:
1" = 25mm
3/4" = 19mm
5/8" = 15mm
1/2" = 12,5mm

Installation
Open the power supply case and pull out the board. Unweld the cables connected to the plug. Install the connector on the board making two new holes at the + and -
Unweld the LED and extend it with wires then put it into the dedicated hole on base.
Weld two wires (brown and blue) for 220 Vac on the board and place two 4.8 mm fastons on the other end of the wires then connect them to the bipolar switch.
Put two more fastons on the ends of the 220Vac power cord and connect them to the bipolar switch. Put the bipolar switch on the dedicated hole on the base.
Put the fan plug connector on the board, making two additional holes on the board to fit it. Insert the female of the fan connector.
Insert everything in the interior space of the base, put the cover and fasten with screws.
Apply (better adding vinyl glue) of the velcro between the base and the aspirator

Installazione
Apri il contenitore dell'alimentatore ed estrai la basetta. dissalda i cavi collegati alla spina. Installa il connettore sulla basetta facendo due nuovi fori in corrispondenza del + e del -Dissalda il led e prolungalo con dei fili quindi inseriscilo nell'apposito foro della base.
Salda due fili (marrone e blu) per la 220 Vca sulla basetta e metti due faston da 4,8 all'altro capo dei fili e connettili all'interruttore bipolare.
Metti altri due faston ai capi del cavo di alimentazione 220 Vca e connettili all'interruttore bipolare. Inserisci l'interruttore bipolare nell'apposito foro sulla base.
Metti il maschio del connettore della ventola sulla basetta, facendo due buchi aggiuntivi sulla basetta in modo da adattarlo. Inserisci la femmina del connettore della ventola.
Inserisci tutto nello spazio interno della base, metti il coperchio e fissa con le viti.
Applica (meglio aggiungendo colla vinilica) del velcro tra basetta e aspiratore

Put the Filter
Cut a square piece of filter to the right size and insert it between the two sides with the holes for the suction

Apllica il Filtro
Ritaglia un pezzo di filtro quadrato alle giuste dimensioni e inseriscilo tra le due facce con i fori per l'aspirazione

Apply M3 nuts to the appropriate spaces in the vacuum cleaner housing

Applica dei dadi M3 negli appositi spazi del contenitore dell'aspiratore

Fix everything with the appropriate screws:

-Self-tapping for the base cover
-M3 bolts for fixing the air outlet adapter

Fissa tutto con le viti adatte:

-Autofilettanti per il coperchio della base
-Bulloncini M3 per fissare l'adattatore di uscita dell'aria

Tags