VAS Combat System Gun and Camera Gremlin Mount by Harquin202 3d model
Warning. This content is not moderated and could be offensive.
m4
3dmdb logo
Thingiverse
VAS Combat System Gun and Camera Gremlin Mount by Harquin202

VAS Combat System Gun and Camera Gremlin Mount by Harquin202

by Thingiverse
Last crawled date: 2 years, 12 months ago
This is combination mount for the VAS combat system's IR Guns and a micro camera on the VAS Gremlin Biplane. I designed the mount around the Foxeer Toothless night camera to see the IR LEDs flashing while shooting, but most micros should fit well.
after the print, take a hobby knife and cut the brace on the front right side to allow the VAS guns to slide in from the front. The brace is needed to print the LED guides but gets in the way of the Day/Night jumper pins.
I use just a touch of hot glue to mount the camera all the way back against the JR plug. This allows you to just barely see the IR LEDs in your feed without obstructing your view so much.

Tags