Toilet paper holder

Last crawled date: 6 years, 1 month ago

In the same spirit as my towel ladder, I used PVC tubing to make a roll of toilet rolls.


I used this time a PVC tube of 20mm diameter to easily pass through the central tube rolls of toilet paper, a drop recovered from a previous project and found easily in supermarket DIY (tube IRL of 20mm). #DAGOMERLIN





There are only two pieces to print:


The base, which prints without support


The cap, which prints without support upside down if it is "basic" ("PQ.stl mouthpiece"), or which prints with support and head up if we customize (such as "End cap PQ poop.stl ").





Then you have to assemble everything to a pvc tube of 20mm diameter (here I used a 60cm long drop) with 3mm diameter bolts and a screwdriver.





It's great because you can customize the cap quickly with an external stl thanks to the openscad code, here I used Sporadic's emoji solid center poop https://www.thingiverse.com/thing:1872372


If you have other ideas for fun caps, feel free to ask them in the comments (or learn how to use OpenScad).


You can easily customize the size of this object or change the cap if necessary because the assembly is done with screws, not with glue: "screws better than glue" (Maker's bill of rights).