Manija puerta / Door Handle by profdanieltedesco 3d model
3dmdb logo
Thingiverse
Manija puerta / Door Handle by profdanieltedesco

Manija puerta / Door Handle by profdanieltedesco

by Thingiverse
Last crawled date: 3 years, 2 months ago
Manija para puertas
Manija apta para puertas de madera, metal que no requieran un uso extremo de la fuerza.
Se recomienda imprimir en ABS:
*Temperatura del extrusor: 240°C
Temperatura de la cama: 100 °C
Es necesario el uso de soporte para impresión, igualmente se recomienda utilizar la función "fijación" en CURA.
Al momento de imprimir, configurar la temperatura de la cama en 100 °C y la del extrusor en 240°C y precalentar el ABS, rociar la cama con laca o similar y comenzar la impresión.
Tiempo aproximado de ejecución, para relleno 20% y una resolución de 0.2: 4,5 horas
Los orificios para tornillos fueron diseñados para tornillos con rosca metrica de 6mm. Podes hacer Remix para tus medidas a través de tinkercad o software de impresión preferido.
En el caso de utilizar PLA se recomiendan los siguientes parametros:
Temperatura del extrusor: 195°C
Temperatura de la cama: 60 °C
Relleno / infill: 60%
Aplicar la función soportes y fIjación en CURA
Door handle
Handle suitable for wooden and metal doors that do not require extreme use of force.
It is recommended to print in ABS:
Extruder temperature: 240 ° C
Bed temperature: 100 ° C
It is necessary to use printing support, it is also recommended to use the "fixation" function in CURA.
When printing, set the bed temperature to 100 ° C and the extruder temperature to 240 ° C and preheat the ABS, spray the bed with lacquer or similar and start printing.
Approximate execution time, for 20% fill and a resolution of 0.2: 4.5 hours
The screw holes were designed for 6mm metric thread screws. You can Remix your measurements through tinkercad or preferred printing software.
In the case of using PLA, the following parameters are recommended:
Extruder temperature: 195 ° C
Bed temperature: 60 ° C
Fill / infill: 60%
Apply the supports and fixation function in CURA

Tags