KTM OEM Enduro Wheel Set

Last crawled date: 1 year, 3 months ago

KTM OEM Enduro Wheel Set for KTM, HUSABERG and HUSQVARNA Enduro bikes.

Blender Cycles.

HUSABERG and HUSQVARNA are brands owned by KTM, they thus use almost the same parts.

Include:
- Metzeler mce 6 days extreme tires.
- Excel AL7 rims.
- Wave galfer disks.

- Each .rar file contains 1 front and 1 rear wheels with both high and low unsubdivided meshes for each format.
- The scale is set to 1.000
- These models are very accurate and very similar to the real world (scale, proportion, sidewall texts for the tires) measured in metric units.
I mostly use quad polygons when modeling and only a very few triangles.

- specs:
Front: Tire: 90/90-21: 680 mm in diameter; 90 mm wide.
            Rim: 1.85x21 inch: 533,4 mm in diameter; 46,99 mm wide.
            Hub: Disk: 260 mm in diameter; 2.5 mm thick.
                      Axle hole: 26 mm in diameter.

Rear: Tire: 180/40-18: 680 mm in diameter; 140 mm wide.
          Rim: 2.75x18 inch: 457,2 mm in diameter; 69,85 mm wide.
          Hub: Disk: 220 mm in diameter; 3.5 mm thick.
                     Sprocket: 270 mm in diameter; 52 teeth.
                     Axle hole: 20 mm in diameter.

- poly counts:
Front: High: 496.211 vertices; 481.190 polygons
          Low: 65.220 vertices; 57.986 polygons
Rear: High: 554.917 vertices; 528.966 polygons
          Low: 60.731 vertices; 50.254 polygons

- textures:
Tires: Front: 4128x4128 sidewall; 2048x2048 tread
          Rear: 4320x4320 sidewall; 2048x2048 tread
Each tire have: 3 normal maps (2 side - 1 tread)
                            3 specular maps (2 side - 1 tread)
                            2 combined diffuse+AO maps (1 for each side - 1 tread)
Rims: 1814x512
Hubs: 1024x1024 (bump map)
Disks: 800x800

- The rendering scene is the .blend file itself.

* This product is compatible with all my other products that belong in the same category.