Thingiverse

EZ Antenna Tracker / Ground Station, EZtracker Immersion RC

by Thingiverse
ImmersionRC featured RcHobbysUK Eztracker V2 design on there website.
http://www.immersionrc.com/3d-print-zone/
Rc EZAntenna Tracker / Ground Station, EZtracker.
This Is still in a working progress.
ALL THE PARTS NEEDED ARE AVALIBLE FROM OUR WEBSITE
http://www.rchobbysuk.co.uk/store/c20/RcHobbysUk_EzAntenna_Tracker.html
WE CAN ALSO PRINT THE TRACKER OUT FOR YOU IF YOU DO NOT OWN A 3D PRINTER Avlible to purchase on our website.
A Quick Video Can be found on the link below
https://www.youtube.com/watch?v=924DQiPbUcY
Test Flight with the Prototype at 1.3miles with no break ups in the video
https://www.youtube.com/watch?v=qOXegce-bcY
Cloud Surfing using the Antenna Tracker
http://youtu.be/fef9T6Dp0CA
It has been designed using a 180deg Pan servo and a 90deg Tilt servo.
2 x Video / Audio Out
1 x Charge input using 2 banna plugs
LCD displaying the battery percentage left and low voltage buzzer.
2 x missile switches 1 for power on and off and one to allow charging to cut connections to electrical devices to prevent damage.
Rubber feet to allow it to sit on top of a car
Tripod mount Attachment
ipad and iphone holder for realtime display of its location.
Please Like and follow to keep updated on the progress.
VTX for transmitting the received video from the tracker to a second Portable VRX to make the antenna tracker wireless
DO NOT CHANGE the orientation of the STl files they are all the correct way for printing.
DO NOT USE SUPPORT, any support needed has been added to the parts
40% infill I think anything between 30-50% would be file.
I will create a list of what is needed along with detailed build instructions as soon as i have fully tested our prototype.
The Pan & Tilt Alloy PIN we used was CNC Machined in house but i have included the stl and with a little sand paper and elbow grease you should be able to get the tight fit on the bearing needed.

Tags