Duckbill Scriber

...poly realistic platypus 3d model 3dexport platypus ornithorhynchus anatinus duckbill duck bill monotremata aquatic animal mammal bird game fantasy...

...platypus 3d model 3dexport platypus ornithorhynchus anatinus watermole duckbill duckmole duck-billed platypus semiaquatic australia aquatic mammal wild animal...

...thingiverse this final variant, its a hybrid version between duckbill with thicker additional wing/paddle areas and make stripping magazines...

...into the underside of the crossbow body with the duckbill facing "up" towards the top, and the tooth that...

...iece of gaze between the support and your skin. please, if anyone test this, let me know the result and i can change pretty fast.

...xed this cool hook that snaps onto the jerker posts so that it has a sweeping duckbill surface for cradling a pair of headphones.

...mm or .315" in addition to resizing the hole, i have widened the slot on the bottom to mesh better with the outside portion.

...a new approach: the filament duck ("inspired" by a duckbill. no fiddling around on the back of the printer...

...ew to allow movement to fine tune the direction. havent printed it yet so try at your own risk. will update after i print and try

....75" & 3.75" (sm., med. & lg.). hanging holes are also provided for storing them on pegboard hooks, nails, etc.

...l = vizio_e50_left_leg.stl i just splited model for printing on compact 3d printer without supports. same for vizio_e50_right_leg

...adjustable slats. it should hold pe tools, tweezers, knives, scriber, brushes, etc. there is a separate module for knife...

...blocks to use my metal ruler as caliper / scriber tool when drawing dimensions and cut lines etc. while...

...o this can be easily printed without supports. you'll just need some super glue when putting the posts and magnets in place.

...nshape. there are existing a few configuration options. but you should be familiar with onshape if you want to use these configs.

...to line up the side panels and use a scriber to drill the holes. keep in mind that you...

...ave to heat one of the m6 hex nuts to fit in pencil holder piece. of course you may found in ebay similar tools for ~25 usd.. :-)

...built in. it also has steps for a parallel scribes in1/16 and 1/8 inch increments. there are increment markings on the back side.