Candy Dispenser Auger for 4 inch PVC pipe by Redneck_Engineer 3d model
Warning. This content is not moderated and could be offensive.
tobacco
3dmdb logo
Thingiverse
Candy Dispenser Auger for 4 inch PVC pipe  by Redneck_Engineer

Candy Dispenser Auger for 4 inch PVC pipe by Redneck_Engineer

by Thingiverse
Last crawled date: 3 years, 3 months ago
My Candy Auger I designed to fit into a piece of 4 inch PVC pipe.
Other parts required:
suitable length bolt
4 nuts
a bearing from a fidget spinner
4 inch PVC pipe
Duct tape
Cardboard (to make a candy reservoir)
Motor and control circuit (optional, you can use the crank if you don't want to use a motor)
You will need to cut a 6inch long by 5 inch wide piece out of the pipe.
The bearing support will need to be taped or glued into place.
see my you tube channel for details: https://www.youtube.com/watch?v=vnOJjVsSS0k&t=8s

Tags