Thingiverse
Bowden Clamp with Zipties for Rostock by EiNSTeiN_
by Thingiverse
Last crawled date: 2 years, 11 months ago
This is a beefier version of the bowden clamp for rostock. I decided to use 3mm filament so the original version was a little bit too small. Then I didn't have a proper nut to hold the tube in place like the original, so I decided to add grooves to the jaw so I could use zipties.
I hold my hotend in place with long screws on each side of it, so I also changed the body to have a square center part instead of a rounded one.
I also added a parameter to this clamp in the scad file, so it can be generated without the hotend hole at the bottom, in order to use the same clamp on the extruder side of the bowden tube.
I hold my hotend in place with long screws on each side of it, so I also changed the body to have a square center part instead of a rounded one.
I also added a parameter to this clamp in the scad file, so it can be generated without the hotend hole at the bottom, in order to use the same clamp on the extruder side of the bowden tube.
Similar models
thingiverse
free
Modified Rostock Bowden Clamp for 1.75mm and MakerGear Hotends w/Zipties by adamjvr
...he openscad file so i had to work with the 3mm version to make mine. i've uploaded it here so that others can make use of it!
thingiverse
free
Bowden Clamp for Rostock Hotend by jamesarm97
...rks with a 4mm tube. the insert / collet could be a little tighter but i just used a piece of tape around the bottom of the tube.
thingiverse
free
Rostock Hotend Mount / Bowden Clamp by piit79
...en tube clamp. it fits j-head hotends (and other hotends with 16mm od).
it uses m3 screws instead of m4 to mount to the platform.
thingiverse
free
Bowden clamp for Rostock by Johann
...n tube won't pop out.
newer versions of the openscad source files will be published here: http://github.com/jcrocholl/rostock
thingiverse
free
Rostock-Mini PTC Bowden hotend adapter by summetj
...onnect fitting instead of a simple m4 nut to hold your bowden tube on top of the hot end on a rostock-mini, this part is for you.
thingiverse
free
Bowden tube mount or holder by sveske
..., with room for zipties.
the 2 bolt holes for 5mm bolts, is so i can mount it to 20x20 extruded nut.
seems to work like i planed.
thingiverse
free
Filament cooler with clamp by pgraaff
... bowden tube by clamps. you need the original hotend cooler https://www.thingiverse.com/thing:2751027 to mount all to the hotend.
thingiverse
free
Davinci Pro 1.0 Bowden tube to hotend fix by kidogo
...o the side makes the bowden inside the hotend pinch the filament. print results have improved considerably using this simple fix.
thingiverse
free
Anycubic Mega Zero - Bowden tube clips by Calvin_MegaZero
...olution looked cheap so i designed a clip for it.
i also scaled the clip to make it suitable for the bowden tube on the extruder.
thingiverse
free
Bowden Hotend Clamp for Vulcanus V1 by ohfudge
...caman for his vulcanus v1 printer.
i designed this to fit the e3d v6 hotend, i can't guarantee it will fit any of its clones.
Einstein
3d_export
$50
A bust of Einstein 3D Model
...a bust of einstein 3d model
3dexport
bust figure art sculpture einstein
a bust of einstein 3d model 3dbyte 85509 3dexport
3d_export
$20
einstein-cyborg
...einstein-cyborg
3dexport
a demo game model from our gaming studio, this can be 3d printable. designed by ig@the_a_things
vizpark
$5
Einstein Vertical
...tical is a set of 3d brick textures for modern buildings, including mulit-textures and 4k tileable textures with material layers.
turbosquid
free
Einstein Bust
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Einstein figure statue
...alty free 3d model einstein figure statue for download as max on turbosquid: 3d models for games, architecture, videos. (1233803)
turbosquid
$5
albert Einstein 3d model
...3d model
turbosquid
free 3d model albert for download as obj on turbosquid: 3d models for games, architecture, videos. (1509768)
turbosquid
$2
Albert Einstein
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$140
Albert Einstein
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$55
Albert Einstein
...alty free 3d model albert einstein for download as ma and ztl on turbosquid: 3d models for games, architecture, videos. (1686581)
thingiverse
free
Parts Rainbow: Ultimate Harbor Freight Parts Organizer by zackfreedman
...freight 40-bin organizer . you'll need 40 per organizer, einstein because harbor freight's products are garbage and their tolerances...
Zipties
thingiverse
free
E3d Tian Idler Arm mod by ChipCE
...r the motor shaft and a grooved bearing fz0463 to guide filament.
to mount the fz0463, use 8mm m3 grub screw and printed adapter.
thingiverse
free
PiRack Bay for Raspberry Pi 4 + StromPiv3 + Battery Hat by foxtrotgolf
...the rj-45 port of the pi added mounts for zipties on the bridges for tying the dc cables thinned...
thingiverse
free
Zip tie standoff / mount by peastham
...mount by peastham thingiverse l-shaped standoff screw mounts for zipties small is 1/2" (12mm), tall is 1" (25mm). accepts...
thingiverse
free
DJI FPV Traxxas Unlimited Desert Racer Mount by TheRealFcKw
...unlimited desert racer. just attach the mounts with some zipties as shown in the pictures. if you are running...
thingiverse
free
Oculus Quest 2 MegaPro Headband V4 by Anarasha
...o balance out the weight of the headset. a power bank is highly suited. i added anchors to ziptie a power bank onto the skull cup
thingiverse
free
custom beta95x parts by karnaugh
...an also use gnb 450mah 3s just add a piece of foam as spacer or tie the 2 strap together. use small ziptie to mount to the frame.
thingiverse
free
ws2811 bullet pixel ziptie clip by miqueles
...s very strong! even at 5% infill.
i tested on pla a stacked print of 120 clips and it seems to work pretty well with 0.3 spacing.
thingiverse
free
FliteTest Arrow complete FPV and electronic bay (Fuselage) by sebrob7
...will stick to the frame with zipties (i love zipties). not sure yet... but anyway, you can certainly have...
thingiverse
free
Wltoys 144001 [Beefed up] Extra Room Under the Body. (Lowered Second Floor Brace)) by cyrexxx
...did. printing the 2nd floor in pla and using zipties and no fan for the esc the pla will...
thingiverse
free
E-bike Ziptie Battery Mount by confidential247
... for bolting part of the mount to the frame if necessary. a nut can also be used on the underside to secure a bolt to the print.
Rostock
thingiverse
free
Oarlock Liner by thwfwa
...inches. i printed it with pla on a seemecnc rostock 3.2 at 40 mm/s. i used cura 4.4 to...
thingiverse
free
E3D Mount / Piezo Sensor for Rostock MAX by bth
...clamp can now be fixed by using m3 screws without nuts)
get more flexibility to change dimensions by percentage in slicer ;-))
thingiverse
free
Mosquito for SeeMeCNC Artemis by emoser
...seemecnc se300 effector used on the artemis and some rostock printeres. you will need...
thingiverse
free
City houses in H0 / HO by NordicTram
...nordictram thingiverse city houses in h0 / ho scale (rostock - germany). see video below -...
thingiverse
free
SE300 Hotend Fan Shroud by Narrow_Path_3D
...i created for the se300 hotend on my seemecnc rostock max version 3.2. it helps achieve better overhangs on...
thingiverse
free
Rostock Delta Printer Nema Mount by frknbsg
...nter is shifted because to get the best torque.
use minimum 3 perimeter and %20 infil. top holes re designed for m3 brass inserts
thingiverse
free
E3D Rostock Mount non-bowden by LawrenceN
...thingiverse a long time ago. i apologize for not extending the attribution. the original scad file is attached for adjustments.
thingiverse
free
Interstellar Communications Array by GarageBay9
...for the dish fits on the bed of my rostock max not modeled for any particular scale message ends...
thingiverse
free
Giants - Independent Dual Extruder (IDEX) by olo2000pm
...3pcs https://ooznest.co.uk/product/100k-epcos-thermistor/ dysza 2pcs https://e3d-online.com/nozzles-v6-brass rurka ptfe 2 metry https://pl.aliexpress.com/item/1m-ptfe-tube-teflon-pipe-to-tl-feeder-j-head-hotend-reprap-rostockbowden-extruder-1/32811240720.html?spm=a2g0s.9042311.0.0.27425c0f6ywpsy wiatraki 4pcs https://pl.aliexpress.com/item/gdstime-2-sztuk-dc-24-v-3d-drukarki-dmuchawy-wentylatora-ch-odnicy-30mm-x-10mm-3010/32864807067.html?spm=a2g0s.9042311.0.0.27425c0f6ywpsy ekstruder 2pcs https://pl.aliexpress.com/item/3d-cz-ci-drukarki-mk8-wyt-aczarki-stopu-aluminium-blok-bowden-wyt-aczarki-1-75mm-w/32895990333.html?spm=a2g0s.13010208.99999999.293.247d3c00ajbum7 krańcówka optyczna 4pcs...
thingiverse
free
TPU Belt Based on The Factorio Belt by wepollock
...concerned. i printed at 40mm a second using a rostock max v2 using a direct drive bondtech extruder and...
Bowden
3ddd
$1
Manooi Artica
...and pendants in various sizes and forms. suspension: galvanized bowden - dia. 1,5 mm. bulb: max 60 w -...
turbosquid
$199
Vintage Ben Bowden Spacelander bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Tronxy X5SA Extruder holder by railer1000
...x5sa extruder holder by railer1000 thingiverse to reduce the bowden pipe length i designed a small holder which can...
thingiverse
free
Sidewinder X1 Bowden holder by CRYSIS-FPV
... you are running the sidewinder x1 - z brace by double_mirages it will help as i run the ptfe tube through the brace.
see photos.
thingiverse
free
Hero Me Gen 5 base for Dragon Hotend by alwayshungry8
...mounting collar uses the original m2.5 screw hardware and bowden collet mounts using 4 mounting screws instead of 2...
thingiverse
free
Direct drive extruder for FLSUN Cube by tato_713
...in these 4 parts. this set replaces the original bowden tube, both ends coupling, and the original feeder support;...
thingiverse
free
Flight Rudder (yaw) pedals for the PS4 DualShock Joystick HOTAS / HOSAS by jpnurro
...the control cable use filament (petg preferred) with the bowden tube. glue (cyanoacrylat) the the filament in to yaw...
thingiverse
free
Tronxy X5S rotating extruder arm by antosha99
...axis. with this extruder brace you can shorten your bowden and easily reach all the corners of the 400...
thingiverse
free
Ender 3 nut extruder by The_Ninjaneer
...3 nut extruder by the_ninjaneer thingiverse does your stock bowden coupling let your tube go mid print? just use...
thingiverse
free
Top Filament Holder 2020 6SE, Ender 3, CR-10, Chiron by Br0tein
...work with any 2020 extrusion. works flawlessly with a bowden setup or a direct drive. the roller has been...
Clamp
3d_export
$250
Clamp 3D Model
...rt
clamp machines project 3d model
clamp 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl vagabond32 109618 3dexport
3ddd
$1
Светильник Clamp
...светильник clamp
3ddd
clamp
стеганый светильник clamp в двух цветах в черном и белом.
3d_ocean
$9
Jerrycan
...accurate dimensions and sizes of elements. cap and lock clamp are separate objects and can be...
3d_export
$15
Terminal Block 3D Model
...3dexport electrical connector terminal block strip modular connect screw clamp barrier wiring electrician light fixture insulation voltage plastic electronic...
3ddd
$1
Clamp
...ricо zanolla , капитоне
дизайнеры
enrico zanolla
andrea di filippo
модель clamp
dzstudio
3ddd
free
Clamp
... enricо zanolla , капитоне
дизайнерenrico zanollмодель clamp
3ddd
$1
Светильник Restoration Hardware ATELIER TASK TABLE CLAMP LAMP BRONZE
...e
3ddd
restoration hardware
светильник restoration hardware atelier task table clamp lamp bronze. в архиве есть файл 3dsmax 2010.
3ddd
free
Bench Vise Clamp Tabletop
...bench vise clamp tabletop
3ddd
тиски
bench vise clamp tabletop
3ddd
$1
Adjustable Clamp Pendant Small
...
dimensions
includes one 8', one 12' and one 19½' extension rod
8¼' diam., 10½'h
weight: 6 lbs.
3ddd
$1
Clamp / DZstudio
... dzstudio , капитоне
люстра clamp от dzstudio/enrico zanolla(италия).