Blackboard yoga revolution

Last crawled date: 1 year, 10 months ago

This is my 2nd entry in this challenge

This time i have made a model that can e transformed into different modes so that it can be used in vast areas.Its manufacturing is not so difficult, could be done using injection molding

It consists mainly of a body and a base, in between these two is the shaft which will help it to transform.This shaft is inserted through one side of the casing and a shaft cap is screwed to the other side of the shaft to secure both the body and the base.The shaft,the body and the base are provided holes or slots for the passage of connection wires
About the user interface, Its made very simple,all you have to do is to select the mode of transaction and do it. Suggestions for bluetooth pairing is that,hold the button for 2 sec the light corresponding to the bluetooth will blink, then will be made discoverable on the mobile devices,which then could be paired easily,(got idea from bluetooth headset). For transaction using NFC,press the button and tap the device anywhere in the front surface of the reader. Also for transaction using card, it could be swiped throught the slot on the right side viz 19mm deep and 1 mm wide.

This reader houses a li-po battery pack similar to that in the mobile phones and could be easily replaced by removing the battery cover, or could be recharged using the USB port provided at the top.

This reader is kept firmly using standard M2.5 screws.

If there are any doubts, please comment so that i can make it better...:-D

More updates are coming for low battery indication