BMP180

...bmp180 thingiverse bmp180

...bmp180 grabcad bosch barometer sensor 3d model - bmp180

...bmp180 breakout board grabcad detailed model for an bmp180 breakout board

...sparkfun bmp180 grabcad sparkfun barometric pressure sensor breakout - bmp180

...bmp180 grabcad sensor arduino, genuino, sensor, bmp180, pressure on, presion relativa, modulo

...bme280 bmp180 si7021 sensor cover thingiverse cover for bme280/bmp180/si7021 sensors, with labels of pinout

...bmp180 (4 pin) 3dwarehouse this is the slightyl smaller version of the bmp180 board with 4 pins 12mm x 10mm

...bmp180 grabcad bmp 180 bosch pressure sensor

...sensor purchased from here: http://www.nskelectronics.in/index.php?route=product/product&product_id=477 scale 1:1000 (meters)

...dht11 bmp180 box by joorriit thingiverse you need a 12 millimeter m2 screw and a m2 of nut.

...dht11 bmp180 box by joorriit thingiverse you need a 12 millimeter m2 screw and a m2 of nut.

...button (15mm diameter) buzzer (30mm hole spacing) arduino nano bmp180 sensor 2x 18650 li-ion battery (length: 68.5mm) npn transistor...

...esp8266 based weatherstation with 0,96" oled display, dht11 temperature&humidity, bmp180 atmospheric pressure and bh1750fvi light sensor credits to https://blog.squix.org/...

...enclosure for my room sensor. it uses a nodemcu, bmp180 temp/barometric pressure sensor, dht11 temp/humidity sensor, ldr light sensor,...

...bme280 bmp180 si7021 sensor cover thingiverse cover for bme280/bmp180/si7021 sensors, with labels of pinout

...bmp180 thingiverse bmp180

...and humidity sensor (i used this one) 1x gy-68 bmp180 barometric and temperature sensor (i used this one) 1x...

...temperature sensor mount with radiation shield for sensors like bmp180 bme280, dht11 and so on. first attach the base...

...outside air. there is a space for an optional bmp180 air pressure sensor. the openscad source code is available...

...process. pinout: 3.3v output to vcc, en (ch-pd), vin (bmp180 gnd output to gnd and gpio15, gnd (bmp180) gpio12...