Thingiverse
8mm rod holders by juanfy
by Thingiverse
Last crawled date: 3 years, 1 month ago
Here are the rod holders i am using for 8mm rod.
Its works great, but you have to take your time to install it correctly.
You will need a caliper to make accurated measurements. Also if you drill a little the base holes you will have a little free movement for error correcting.
There are 2 files:
-8mm hole trough hole
-8mm 15mm depth
You can try whatever you want
You will need to print:
-2 x 8mm rod holders
-2 x 8mm rod holders (mirrored with your slicer)
For setup:
i recommend you to assemble the rods, linear bearings and bed first.
-Once you have it, and your rods are parallel and centered, mesure the exact distance between rods.
-Insert the 4 rods holders.
-Then you can use american tape (or whatever) to temporary fix the holders, take your time to put the correct distance between rods and between a single rod and profile center.
-Now you can tighten the screws.
-put some grease in the rods
Enjoy!
Its works great, but you have to take your time to install it correctly.
You will need a caliper to make accurated measurements. Also if you drill a little the base holes you will have a little free movement for error correcting.
There are 2 files:
-8mm hole trough hole
-8mm 15mm depth
You can try whatever you want
You will need to print:
-2 x 8mm rod holders
-2 x 8mm rod holders (mirrored with your slicer)
For setup:
i recommend you to assemble the rods, linear bearings and bed first.
-Once you have it, and your rods are parallel and centered, mesure the exact distance between rods.
-Insert the 4 rods holders.
-Then you can use american tape (or whatever) to temporary fix the holders, take your time to put the correct distance between rods and between a single rod and profile center.
-Now you can tighten the screws.
-put some grease in the rods
Enjoy!
Similar models
thingiverse
free
Rod Support 8mm MakerBeamXL by urst13
... spacers to increase the distance between the rods.
rods can be fixed with m3 screws/nuts
mk2: hole for fixing position was added
thingiverse
free
Wanhao Di3 8mm rod spool holder by joochung
...spool holder. make sure its tight.
its pretty simple. rotates smoothly. relatively easy to take the spool off and put it back on.
thingiverse
free
X-End Vertical LM8UU / X-Carriage by PropsFactory
...g for belt (best used with gt2 / t2.5)
8mm clip for z rods (may be lightly filed, or not) no bearing needed (z is not stressed)
thingiverse
free
70mm hole Spool holder by kyoday
...u can fill at will, i filled it to 15% but you can also put 10%, the second model is prettier, it takes more time to print though
thingiverse
free
LM8UU case by juanfy
...ances with a caliper.
correct the distance error and tighten it. check if the rods can run smooth before assemble in the printer.
thingiverse
free
Simple Universal Spool Holder by Changc22
... on the rod groove, zip tie one size. put your spool through the spool, put the other end of the rod on the other printed holder.
thingiverse
free
Sintron X-Axis Endstop Holder by patrick204
...04
thingiverse
simple x-axis endstop holder. clamps between both x-axis rods.
distance between rods = 45mm
diameter of rod = 8mm
thingiverse
free
Closet mobile phone holder by jasonnova
...n test the fit for your closet. print this first. if the test strip fits you can also use it for other containers you can design.
thingiverse
free
Connecting Rod by reichwec
...s with a hole diameter of 0.750". i have included the inventor file for your use to modify the part as your needs dictate.
thingiverse
free
8mm rod mount for 2020 extrusion by joochung
...wide cylinder, you can rotate it to any orientation you need. put two of them on your 2020 frame and place an 8mm rod in between.
Juanfy
thingiverse
free
X tensioner for tevo tarantula by juanfy
...rew
updated: if you want to add a wire chain you should better download this one:https://www.thingiverse.com/thing:2829404
enjoy!
thingiverse
free
KZ ZSX case by juanfy
...s with supports
nozzle 0.4
layer height 0.15 (more smooth, better layer adhesion and supports more easy to remove)
with supports.
thingiverse
free
M3 tarantula nut by juanfy
...fter print:
you ve to take your time carefull removing all the supports without breaking the legs (i ve used the tool in the pic)
thingiverse
free
Chain igus compatible for nema 17 by juanfy
...re also flange sockets to fix the wire just before the first chain link (in both parts).
all parts are tested and working.
enjoy!
thingiverse
free
LM8UU case by juanfy
...ances with a caliper.
correct the distance error and tighten it. check if the rods can run smooth before assemble in the printer.
thingiverse
free
Mi band 4 replacement wrist band by juanfy
... perfectly because i ve make some iterations before uploading.
i ve uploaded the step file so feel free to do any changes u like.
thingiverse
free
Chain holders for tevo tarantula by juanfy
...so used supports in the chain links.
if you are try "bed chain bracket chain down" just let me know if it works.
enjoy!
8Mm
turbosquid
$50
8MM CAMERA.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
kodak 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Brass Bush Bearing 8mm ID
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
wrench big collection from 8mm to 32mm
...llection from 8mm to 32mm for download as obj, fbx, and sldas on turbosquid: 3d models for games, architecture, videos. (1438111)
turbosquid
$1
Flexible Shaft Coupling 6mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Flexible shaft coupling 5mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
German WWII Breda MG-8mm Ammo Box (Low Poly)
...g-8mm ammo box (low poly) for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1395526)
3ddd
free
Treasures of the Sea
...treasures of the sea 3ddd бижутерия d=8mm ...
3d_export
$5
double thread screw
...thread length: 10 mm total length: 41 mm diameter: 8mm ...
3d_export
$5
large double thread screw
...thread length: 10 mm total length: 115 mm diameter: 8mm ...
Rod
archibase_planet
free
Rod
...rod
archibase planet
shank rod
so rod - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Spinning rod
...g rod
archibase planet
spinning rod spinning rod fishing-rod
spinning rod - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
rod handle
...rod handle
3dexport
rod handle
3ddd
$1
bench with rods
...bench with rods
3ddd
скамейка
bench with rods
3ddd
$1
диван ROD
...диван rod
3ddd
rod , living divani
http://www.livingdivani.it/
3ddd
$1
кресло ROD
...кресло rod
3ddd
rod , living divani
http://www.livingdivani.it/
design_connected
$18
Rod Armchair
...rod armchair
designconnected
living divani rod armchair computer generated 3d model. designed by lissoni, piero.
archive3d
free
Rod 3D Model
...rod 3d model
archive3d
shank rod
so rod - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$15
Fishing rod
...urbosquid
royalty free 3d model fishing rod for download as on turbosquid: 3d models for games, architecture, videos. (1684756)
turbosquid
free
Heating Rod
...rod
turbosquid
free 3d model heating rod for download as obj on turbosquid: 3d models for games, architecture, videos. (1482690)
Holders
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.