Thingiverse
620 Film Spool - For medium format film camera by ComradeQuiche
by Thingiverse
Last crawled date: 3 years, 1 month ago
A 620 film spool for medium format cameras.
120 film spools are easy to come by, and can be bought new at camera stores, and online, but 620 spools are harder to find and can cost way to much for what they are.
Though 120 and 620 spools are very very similar some older cameras just simply will not accept a 120 spool (Or they do....after some extreme jamming, or trimming of the spool). In this case I normally have to find some old 620 spools, then take my 120 film, and re-spool it onto the 620 spool. Problem is they are hard to find, normally one comes with any old 620 camera you buy... But you need a second one! (you need one for the film to actually be spooled on, and then you need one as the "take-up" spool for the film to wind onto once in the camera.
The best example is a Brownie Hawkeye. Luckily, you can load a 620 spool into the back of the camera, and use a standard 120 film spool for take up.
I made this model because although you can find 620 spools, they are a pain to find and people want way to much for them!
120 film spools are easy to come by, and can be bought new at camera stores, and online, but 620 spools are harder to find and can cost way to much for what they are.
Though 120 and 620 spools are very very similar some older cameras just simply will not accept a 120 spool (Or they do....after some extreme jamming, or trimming of the spool). In this case I normally have to find some old 620 spools, then take my 120 film, and re-spool it onto the 620 spool. Problem is they are hard to find, normally one comes with any old 620 camera you buy... But you need a second one! (you need one for the film to actually be spooled on, and then you need one as the "take-up" spool for the film to wind onto once in the camera.
The best example is a Brownie Hawkeye. Luckily, you can load a 620 spool into the back of the camera, and use a standard 120 film spool for take up.
I made this model because although you can find 620 spools, they are a pain to find and people want way to much for them!
Similar models
thingiverse
free
Film take up spool for old Mamaya 6 camera by Sixpm
...s a 8mm prong instead of the normal 120 prong, so i have to design it from scratch in order to use it with this beautiful camera.
thingiverse
free
35mm to 120 film adapter by silver_kopek
...er (one had a boss, one has a receiver so they locate)
i have printed a few with a 0.8mm nozzle in draft mode and it worked fine.
thingiverse
free
620 take up spool for 35mm film
...se
this is a 620 size film takeup spool for using 35mm (135) cassette film in 620 cameras such as the kodak brownie box cameras.
thingiverse
free
120 Takeup Spool for 35mm Film by coconnor55
...//www.pinholeprinted.com) but can be used in any 120 medium format camera.
version c
license: cc by sa 3.0 - attribution required
thingiverse
free
120 to 116 / 616 Film Spool Adapter by Photochemicals
...n thingiverse, but they didn't quite fit my one of my cameras, so i remade it to fit. they should work in any 116/616 camera.
thingiverse
free
620 Film to 35mm film Adaptor by Bonzo_Madrid
...e to spool and load the film into the camera under complete darkness, not even under a safelite [i know this from experience :( ]
thingiverse
free
120 Film to 127 Film Cuttingtool by domi1l
...e housing cover on top. and spin the knob until the film is ready. maybe there are some issues, i didn't testet the tool yet.
thingiverse
free
120 to 118 Film spool adapter by blaskkaffe
...for 118 film, like the kodak autographic 3a and similar the adapter has two parts, one that fits in...
thingiverse
free
Spool spin table by FilamentCorner
... good when it comes to designing gears. you may need a different sized spool holder to fit other filament spools. happy printing.
thingiverse
free
120 Film scaner for Godox Bowens reflector by alexeyzel
...d light with bowens reflector (17cm). it just snaps on reflector, and you can use camera on tripod to "scan" your film.
Comradequiche
thingiverse
free
Bulkhead Door for Necromunda Wall Section by ComradeQuiche
... that can be glued onto existing necrounda wall sections. can be glued on in open or closed position.
pinted on a form 2 printer.
thingiverse
free
Magnetic Sharpie-Cap Screwdriver by ComradeQuiche
...kerbot 2 so i redesigned some components to work more smoothly with this 3d printer in particular. (i ran it at 1.2mm resolution)
thingiverse
free
Strap-Lugs for Russian Sputnik Camera by ComradeQuiche
...printed out these simple strap lugs.
they replace the black metal winding knob parts (shown in the images attached to this page)
thingiverse
free
3D Printable Ruins, for 40k / Mini-Wargaming Flying-Bases by ComradeQuiche
...ery own here! http://www.shapeways.com/model/1347177/ruins-for-warhammer-40k-flying-bases.html?li=search-results&materialid=6
thingiverse
free
Industrial pipe components for Warhammer40k by ComradeQuiche
..., so you may need to do a bit of sanding and finishing if you plan on printing with any printer that works at a lower resolution.
thingiverse
free
Cord Holding Desk Plug (fits 1.5" / 38.5mm holes) by ComradeQuiche
...a furniture that is hollow inside, the small flange helps conceal the edge of the hole plus any scratches caused by the hole saw.
thingiverse
free
Knog Blinder Mount for Topeak Rear Bike Rack by ComradeQuiche
... picture or fipped to the inside of the bike rack, which makes the knog blinder only stick out a few millimeters out of the back.
thingiverse
free
Prototype style hand grip for Airsoft by ComradeQuiche
...mp5k. wait till it arrives, spray paint it a matte, or textured black, and install on your mp5k using the existing retaining pin!
thingiverse
free
Iphone 5 Tripod quick-release by ComradeQuiche
... and wants to try it on their tripod please send me a message with what type of tripod you are using so i can add it to the list!
thingiverse
free
Glasses mount for Lancer Tactical Goggles by ComradeQuiche
...ibility. any changes that would inhibit the protective feature of your goggles should not be undertaken. modify at your own risk.
620
thingiverse
free
620 Film Roll by Mr_TJack11
...620 film is no longer a thing so this film roll will hold other sizes just not 620. it is designed to fit in a 620 socket though.
thingiverse
free
Single 620 film spool by gketner
...single 620 film spool by gketner
thingiverse
620 film spool
thingiverse
free
KTM DUKE 620 REAR BLINKER
...ktm duke 620 rear blinker
thingiverse
ktm duke 620 rear blinker
thingiverse
free
620 take up spool for 35mm film
...se
this is a 620 size film takeup spool for using 35mm (135) cassette film in 620 cameras such as the kodak brownie box cameras.
thingiverse
free
Htc desire 620 cover by ramonsaintc
...cover by ramonsaintc
thingiverse
honeycomb shapped cover for htc desire 620
have you printed it? let me know if it fits right
thingiverse
free
Replacement headband Xtech 620
...replacement headband xtech 620
thingiverse
model in process - replacement headband.
thingiverse
free
Datsun 620 Cup Holder by ChrisGalasso
...s will have a wedge shape to fit tightly in your stock datsun 620 console. you can scale it up slightly to fit a larger cup also.
thingiverse
free
Cirrus 620 Medicine Cabinet Organizer by Benagami2
...i2
thingiverse
this is the pull out medicine cabinet organizer shown in the cirrus 620 "will it fit" video on youtube.
thingiverse
free
Sensor holder Sensus 620 TCRT5000 by jarano
...rt5000 na vodoměr sensus 620.
měření pomocí s0 (1imp = 1litr)
voděodolný při použití silikonu (ir sensor, víčko, průchod kabelů).
thingiverse
free
sewing machine lever Model No.620 by sugoi_pank
...sewing machine lever model no.620 by sugoi_pank
thingiverse
Film
thingiverse
free
film Stretch / Film estensibile by Cristian3egnarDi
...film stretch / film estensibile by cristian3egnardi
thingiverse
film stretch holder
thingiverse
free
ULTIMATE 35mm film scanner | film holder
...ultimate 35mm film scanner | film holder
thingiverse
scan your 35mm
thingiverse
free
120 film to 127 film cutter by Bustenchops
...m cutter by bustenchops
thingiverse
i made this to cut 120 film down to 127 format for my old cameras. uses safety razor blades.
thingiverse
free
Film case by ks_lab
...rolls of 35mm film or 4 rolls of 120 film. it is also possible to combine both: 2 rolls of 120 film and three rolls of 35mm film.
thingiverse
free
valve film by Bortsov
...valve film by bortsov
thingiverse
valve film
thingiverse
free
film canister by Munchie12
...film canister by munchie12
thingiverse
film canister
thingiverse
free
620 Film to 35mm film Adaptor by Bonzo_Madrid
...e to spool and load the film into the camera under complete darkness, not even under a safelite [i know this from experience :( ]
thingiverse
free
Film Slitter by oet
...o make one strip of 16mm and one strip of 9.2mm film out of a regular 135-film for use in different kinds of subminiature cameras
thingiverse
free
Film Camera by Jake_Lipinski
...film camera by jake_lipinski
thingiverse
a 3d printed film camera
thingiverse
free
mx switch film
...mx switch film
thingiverse
mx mechanical switch film
Medium
thingiverse
free
medium container by speedtwin69
...medium container by speedtwin69
thingiverse
medium container
thingiverse
free
medium barding - horse
...medium barding - horse
thingiverse
medium barding - horse
thingiverse
free
Medium Ship by Myrdah
...medium ship by myrdah
thingiverse
medium ship for sci-fi tabletop games.
thingiverse
free
The Medium AND the Message by tomburtonwood
...the medium and the message by tomburtonwood
thingiverse
to paraphrase marshall mcluhan 3d printing is the medium and the message
thingiverse
free
Medium square brackets
...medium square brackets
thingiverse
medium size bracket for furniture etc. sorry for low print quality
thingiverse
free
medium fries
...otes.
scan for objects plates etc.
if no containers etc then print with container.
if plate etc then consider print to plate etc.
thingiverse
free
Shodengi Medium Battler by tassic
...shodengi medium battler by tassic
thingiverse
shodengi medium battler
thingiverse
free
Medium ant feeder by krzychu072
...medium ant feeder by krzychu072
thingiverse
medium ant feeder for formicarium
thingiverse
free
Vickers Medium Mk.I by JARLANG
...vickers medium mk.i by jarlang
thingiverse
vickers medium mk.i - 1:72
thingiverse
free
Vickers Medium Mk.II by JARLANG
...vickers medium mk.ii by jarlang
thingiverse
vickers medium mk.ii - 1:72
Format
thingiverse
free
Rock Formations by WastelandScenics
...rmations by wastelandscenics
thingiverse
based rock formations ready for the battlefield, designed for use in the 40k universe.
thingiverse
free
Piece pour orientation by Formation
...piece pour orientation by formation
thingiverse
formation
thingiverse
free
Crystal Formations by EDPTechEdStudent
...crystal formations by edptechedstudent
thingiverse
a project so i can learn both openscad and customizer :)
thingiverse
free
Jeton Caddy 3D Formation
...jeton caddy 3d formation
thingiverse
jeton caddy pour formation 3dlab
thingiverse
free
Formation of Life by keelydunford
...ife by keelydunford
thingiverse
this piece is a remix of 'candle holder' by secliways and cellular lamp by nervoussystem
thingiverse
free
Cas partique Couper by Formation
...cas partique couper by formation
thingiverse
fichier pour formation impression 3d artilect lab
thingiverse
free
Medium Format Barrel by eisenhower
...medium format barrel by eisenhower
thingiverse
this is part of an assembly for using dslr to capture medium format negatives.
thingiverse
free
Acorn Sugar Pot by Formatize
...acorn sugar pot by formatize
thingiverse
acorn sugar pot.
thingiverse
free
Yoda in .STL format by falken76
...yoda in .stl format by falken76
thingiverse
this is my yoda model in .stl
thingiverse
free
Crystal Formation by SWDesignFiles
...ese, then get some neopixel jewels for them, and rig the whole thing up to an arduino for a really cool and pretty decor project!
Spool
thingiverse
free
Spool Support For Anycubic Spool Holder and AMZ3D Spools by Kobaratsu
... amz3d spools by kobaratsu
thingiverse
spool axis support to avoid jerks on spool, using anycubic spool holder and amz3d spools
thingiverse
free
Spool adapter for Warhorse spool
...spool adapter for warhorse spool
thingiverse
a simple spool adapter to use abs warhorse spool with a 72 mm hole diameter.
thingiverse
free
Spool holder for 1KG Spools by angkor
...spool holder for 1kg spools by angkor
thingiverse
spool holder for 1kg spools
thingiverse
free
Spool holder
...spool holder
thingiverse
i use this spool holder for up to 1kg spools and should fit all spools.
thingiverse
free
Spool assembler
... empty spool with this spool assembler
just cut an empty spool in half , put your filament and assemble with this spool assembler
thingiverse
free
Small Spool and Spool Stand by Beckman13
...ool holder are meant for 50 gram flexible filaments. the two sides of the spool holder are meant to slide together and interlock.
thingiverse
free
spool spindle cap for 25mm spools by Seadevil
...spool spindle cap for 25mm spools by seadevil
thingiverse
spool spindle cap for 25mm spools
thingiverse
free
spool ! by St0rmingBr4in
...spool ! by st0rmingbr4in
thingiverse
this is a spool !
thingiverse
free
Spool Holder for large spools by dmonkey
...y
thingiverse
a spool holder that you can attach to the back of a makerbot replicator that can hold large filament spools (1kg)
thingiverse
free
Spool roll
...spool roll
thingiverse
spool roll
Camera
thingiverse
free
Camera to camera adaptor by RayvenLover
...camera adaptor by rayvenlover
thingiverse
allows you to mount two cameras, one ontop of the other. uses standard bsp 1/4 thread.
thingiverse
free
camera + textures
...camera + textures
thingiverse
camera
thingiverse
free
Camera by carlynton
...camera by carlynton
thingiverse
camera
thingiverse
free
Camera Mount for Yi Home Camera
...era
thingiverse
a simple camera mount for the yi home camera. mounts in rails with t-nuts.
v2 is a solid body with cut letters.
thingiverse
free
Camera by Danielesko30
...camera by danielesko30
thingiverse
this is a basic camera
thingiverse
free
Camera by BasicallyChurch
...camera by basicallychurch
thingiverse
basically a little camera.
thingiverse
free
Case camera
...case camera
thingiverse
piece for heli camera
thingiverse
free
Camera by MNinventer
...camera by mninventer
thingiverse
fake camera for the kids.
thingiverse
free
Camera Platform for RasPi Camera by ElieWardini
...thingiverse.com/thing:1646474
update: i have a new version of the “watcher”, there is more space for the camera to swivel.
enjoy!
thingiverse
free
Camera back case for RaspberryPi Camera by blackstyles
...era by blackstyles
thingiverse
camera back case for raspberrypi camera "noir camera(5mp) for raspberry pi" + ir lights