Thingiverse
5X4 Reducer for Oneida Super Dust Deputy by gtrgeo
by Thingiverse
Last crawled date: 2 years, 11 months ago
Customized version of https://www.thingiverse.com/thing:2015939. This was designed to work as a reducer for the inlet of Oneida's 5" Super Dust Deputy. I designed this to fit internally to the opening to avoid having an internal step down and reduce turbulence. The reducer is sized to fit a 4" flex duct on the smaller end. This slips easily into the opening in the Super Dust Deputy as designed but is not sloppy. It can be secured with foil tape or a bead of sealant. You should print a test ring of the larger side to ensure fit in your cyclone.
I was unable to get the online Thingiverse customizer to work properly and ended up using OpenScad on my PC per this tutorial. https://www.dr-lex.be/3d-printing/customizer.html
I was unable to get the online Thingiverse customizer to work properly and ended up using OpenScad on my PC per this tutorial. https://www.dr-lex.be/3d-printing/customizer.html
Similar models
thingiverse
free
dust deputy to xcarve dust boot adapter
...e coupler to interface an inventables xcarve dust shoe hose (1.5"id) to an oneida dust deputy cyclone extractor (2"od).
3dwarehouse
free
Oneida Dust Deputy w Bucket
...h bucket as it was purchased. model is to scale as close as i could get it. #bucket #cyclone #dust_collector #dust_deputy #oneida
3dwarehouse
free
Oneida Dust Deputy
...lonically separate fine dust and bulk debris from the air-stream before it reaches the vacuum and filter. (drawn with sketchup 8)
grabcad
free
Dust Deputy
...eputy dust separator, dust cyclone, dust collector. did the best i could using calipers and a nice ruler.
model units are inch.
grabcad
free
Cyclone Dust Separator
...ks drawing of plastic chinese cyclone dust separators. these cyclones work fine and cost a fraction of the dust deputy and oneida
thingiverse
free
Oneida Air System 5 Inch Connection Adapter by lg1382
...0 seconds and it will relax enough to slide on and seat nicely on the adapter.
tips and comments / feedback greatly appreciated.
thingiverse
free
Ridgid Wet Dry Vacuum Hose to Oneida Air Systems Dust Deputy Cyclone by tprchuck
...
recommend using petg. i used the following print settings:
layer height: 0.3mm
perimeters: 4
infill: 20%
support: not necessary
thingiverse
free
Oneida Air Systems Dust Deputy Hose to Ridgid Wet Dry Vacuum by tprchuck
...
recommend using petg. i used the following print settings:
layer height: 0.3mm
perimeters: 4
infill: 20%
support: not necessary
3dwarehouse
free
Cyclone Separator 4 inch inlets dust collection
...orts. this is designed to look like the oneida super dust deputy for designing small woodworking shops. dimensions are estimated.
thingiverse
free
Dust Separator
...dust separator thingiverse this is a dust separator similar to the "dust...
Gtrgeo
thingiverse
free
Losi XX Front Bumper by gtrgeo
...ingiverse
replacement front bumper for losi xx, xxcr, xxcrke rc buggy. this is slightly thicker than stock but fits as original.
thingiverse
free
Losi XXCR Rear Shock Tower by gtrgeo
...losi xxcr rear shock tower by gtrgeo
thingiverse
rear shock tower for losi xx buggy. this should fit xx, xxcr, or xxcrke.
thingiverse
free
Tamiya Rear Hex Adapter by gtrgeo
... 12mm hex wheels.
i have not actually printed this yet; it is dimensionally copied from an aluminum commercially available part.
thingiverse
free
Tamiya Blackfoot Rear Arms - Reinforced by gtrgeo
...aps in the walls. i closed up the gaps and reinforced the shock mounting area as this is a known weak point in the original parts
thingiverse
free
Fein Vacuum Hose Connector by gtrgeo
...ending on your printer. i would suggest printing some test rings from each end to ensure fit and make adjustments in your slicer.
thingiverse
free
Hitec Servo Horn for T3 by gtrgeo
... the hole for the ball-stud will likely need to be reamed a bit to start threads. i ran a tap through and everything fit up fine.
thingiverse
free
Ender 3 SD, Micro SD, USB Holder by gtrgeo
.... the remaining was re-designed in tinkercad. i felt comfortable with the amount and type of storage slots and carried them over.
thingiverse
free
Ender 3 V2 Logo Screen Cover by gtrgeo
... reduced as the original felt bulky to me. i also adjusted the dimensions for better fit of the screen opening and less overhang.
Oneida
turbosquid
$15
oneida tableware
...e 3d model oneida tableware for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1386530)
thingiverse
free
Oneida Air Systems Dust Deputy Hose to Ridgid Wet Dry Vacuum by tprchuck
...
recommend using petg. i used the following print settings:
layer height: 0.3mm
perimeters: 4
infill: 20%
support: not necessary
thingiverse
free
Ridgid Wet Dry Vacuum Hose to Oneida Air Systems Dust Deputy Cyclone by tprchuck
...
recommend using petg. i used the following print settings:
layer height: 0.3mm
perimeters: 4
infill: 20%
support: not necessary
thingiverse
free
Ridgid Wet Dry Vacuum Hose to Oneida Air Systems Dust Deputy Cyclone by tprchuck
...
recommend using petg. i used the following print settings:
layer height: 0.3mm
perimeters: 4
infill: 20%
support: not necessary
thingiverse
free
Oneida Air System 5 Inch Connection Adapter by lg1382
...0 seconds and it will relax enough to slide on and seat nicely on the adapter.
tips and comments / feedback greatly appreciated.
thingiverse
free
dust deputy to xcarve dust boot adapter
...an inventables xcarve dust shoe hose (1.5"id) to an oneida dust deputy cyclone extractor...
thingiverse
free
Chef knife sheath by Pondopholous
...pondopholous thingiverse this sheath was designed for a 19cm oneida chef's knife. a raft or brim is recommended for...
thingiverse
free
Mandolin Slicer Guard by DotMakeTrix
...mandolin slicer guard by dotmaketrix thingiverse bought an oneida mandolin slicer and noticed it didn't come with a...
thingiverse
free
Dust Deputy Adapter for Festool Sleeved Hose by pshultz
...little adapter from the festool sleeved hose to the oneida dust deputy. don't forget to add some of the...
5X4
turbosquid
$40
Exhibition stand 5x4
... model exhibition stand 5x4 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1628814)
3d_export
$12
set of 73 parts bolts nuts washers nails etc
...23mm)<br>bolt, philips dome head for sleeve:<br>- 3mm<br>- with shank (5x4 10x3, 10x4 and 10x5mm)<br>sleeve: 2, 2.5, 3, 3.5 and...
3dfindit
free
3930-5X4
...3930-5x4
3dfind.it
catalog: wade
thingiverse
free
5X4 Cylindar by kcimini
...5x4 cylindar by kcimini
thingiverse
thingiverse
free
5x4 Drone Propeller by RCLifeOn
...5x4 drone propeller by rclifeon
thingiverse
watch the video here: https://youtu.be/k6wfctafrvw
thingiverse
free
5x4 MOLLE panel by Mk2Custom
...ore small items like pens or lights.
i made this using this single rectangle template: https://www.thingiverse.com/thing:4657203
thingiverse
free
Warhammer Movement Tray 5x4 - 20mm by subthermal
...warhammer movement tray 5x4 - 20mm by subthermal
thingiverse
thingiverse
free
6mm BR Bench rest shooting tray 5x4 by ljubigamajka
...6mm br bench rest shooting tray 5x4 by ljubigamajka
thingiverse
6mm br bench rest shooting tray 5x4
thingiverse
free
5x4 P20 Mechanical Keyboard DIY Kit
...s://pabileonline.blogspot.com/search/label/pabile20 for details.
update 20200106: uploaded p20 top plate grid.dxf for mx switches
thingiverse
free
5x4 movement tray for 28 mm base miniatures by PhysUdo
...r miniatures from mantic games. the height of the bases is assumed to 3 mm, the movement tray has an inner size of 10.1 x 8.1 cm.
Deputy
turbosquid
$1
Deputy police car
...odel deputy police car for download as jpg, 3ds, obj, and md3 on turbosquid: 3d models for games, architecture, videos. (1500140)
3d_export
$18
deputy building-gourd-blue house 32
...deputy building-gourd-blue house 32
3dexport
deputy building-gourd-blue house 32<br>3ds max 2015
thingiverse
free
Deputy Sheriff Badge by Tcorgard
...fnv. i did make the badge from the game, but some of the letters are too small to 3d print, and i could not model the little keg.
thingiverse
free
Dust Deputy Template by mrandazzo45
...t the bottom gasket also if you wish, it was much faster cutting it out of some 6mm mdf.
import as inch !
hope it works for you.
thingiverse
free
Sheriff's Deputy Hat by Skimbal
...sheriff's deputy hat by skimbal
thingiverse
"is there a problem officer?"
-me, last week
thingiverse
free
Dust Deputy Input to 2" Vacuum Adapter by linsomniac
...n be used to fix it to the dust deputy, and it fits deep onto the dust deputy input (which is a 2 step part, it snugs onto both).
thingiverse
free
dust deputy to xcarve dust boot adapter
...e coupler to interface an inventables xcarve dust shoe hose (1.5"id) to an oneida dust deputy cyclone extractor (2"od).
thingiverse
free
Black Orchestra Deputy Token Holders by cdburgess
...her to hold the deputy tokens for black orchestra. you can print them yourselves or order them from https://bghq.us
happy gaming!
thingiverse
free
sunset sarsaparilla deputy badge by atomickosmo
...sunset sarsaparilla deputy badge by atomickosmo
thingiverse
you can always adjust the size
no supports
thingiverse
free
Dust Deputy Hose Connector for 2" Hose by A1cPeanut
...ust deputy cyclone dust collector in your shop, this will mate with the horizontal tube off it and connect to a 2" vac hose.
Dust
3d_export
$10
of dust filter
...of dust filter
3dexport
3d model of dust filter
3ddd
$1
Dust Furniture
..., тумба
мебель dust furniturehttp://www.dnssupply.com.au/home/brands/dust.html
turbosquid
$99
Moon Dust
...rbosquid
royalty free 3d model moon dust for download as max on turbosquid: 3d models for games, architecture, videos. (1263800)
turbosquid
$2
Dust Bin
...urbosquid
royalty free 3d model dust bin for download as obj on turbosquid: 3d models for games, architecture, videos. (1201308)
turbosquid
$2
closed to dust
...uid
royalty free 3d model closed to dust for download as stl on turbosquid: 3d models for games, architecture, videos. (1403703)
turbosquid
$3
Dust Bin
...d
royalty free 3d model dust bin for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1448076)
turbosquid
$40
Dust Glasses
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
dust broom
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Dust Pan
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Luminaires Dust
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Reducer
turbosquid
$20
Motor Reducer
...quid
royalty free 3d model motor reducer for download as iam on turbosquid: 3d models for games, architecture, videos. (1165191)
3d_export
$5
nw planetary reducer
...nw planetary reducer
3dexport
nw planetary reducer
turbosquid
$10
Micro Reducer
...del micro reducer for download as max, ipt, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1626248)
3d_export
free
2-stage reducer
...2-stage reducer
3dexport
use catia to draw the assembly of level 2 reducer!
turbosquid
$12
Reducer Charm Ming
...
royalty free 3d model reducer charm ming for download as rfa on turbosquid: 3d models for games, architecture, videos. (1303601)
turbosquid
$7
Compression reducing tee
...ty free 3d model compression reducing tee for download as max on turbosquid: 3d models for games, architecture, videos. (1540313)
turbosquid
$19
Tram reduced model
...3d model tram reduced model for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1203059)
3d_export
free
first stage reducer
...ell in motion simulation, especially for the assembly and disassembly of reducer when surveying and mapping for college students.
3d_export
$35
Helical reducer 3D Model
...echanism evolvent
helical reducer 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl kazankindima20220 104069 3dexport
3d_export
$35
Helical reducer 3D Model
...cal 3d solidworks
helical reducer 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl kazankindima20220 104065 3dexport
Super
3ddd
free
super impossible
...super impossible
3ddd
kartell , super impossible
cтул super impossible фирмы kartell
3d_ocean
$19
Super market
...ean
chain shop large super market 3d model low poly market low poly super market shop super market
low poly model of supermarket.
3d_export
$15
super mario
...r mario.<br>superstar, super mario superhero.<br>сheerful and courageous.<br>new exciting adventures await him.
3d_ocean
$30
Super Hero
...hero mask ninja super hero sword zbrush
super hero created in zbrush 4.0 hero body—6 division levels 1.668 poly to 1.705mil poly.
3d_export
$25
super promotion
...super promotion
3dexport
3d_export
$5
super sledge
...super sledge
3dexport
...
3ddd
$1
Longboard Super Sonic
...longboard super sonic
3ddd
лонгборд
longboard super sonic
turbosquid
$60
Super Soldier
...quid
royalty free 3d model super soldier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1211725)
turbosquid
$60
Super Soldier
...quid
royalty free 3d model super soldier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1207493)
turbosquid
$55
Super Hero
...squid
royalty free 3d model super hero for download as blend on turbosquid: 3d models for games, architecture, videos. (1387035)