Thingiverse
54mm Breville Dosing Cup by sjdannen
by Thingiverse
Last crawled date: 2 years, 10 months ago
Remixed from Katokun's design so that the ring was a little larger in diameter and the tab that pushes the button to initiate a grind is longer. I also added a piece inside the cup so that once I turn it over to dump the grinds in to the portafilter I can spin it to push the grind away from the outside. This is to possibly decrease the mess once I take the cup off. Oh yeah, made it a bit shorter since I'm only grinding 18grams at a time. Shorter cup printed faster.
Katokun's original text:
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR.
Printing:
Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it.
Spade - Infil to add weight, no supports
Letters - Print flat, already scaled to fit nicely in the embossing
Star - Infil to add weight.
Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight.
Glue in lettering and spade. Star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
Katokun's original text:
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR.
Printing:
Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it.
Spade - Infil to add weight, no supports
Letters - Print flat, already scaled to fit nicely in the embossing
Star - Infil to add weight.
Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight.
Glue in lettering and spade. Star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
Similar models
thingiverse
free
Simple Hook for cups by Proxy89
...ering and spade. star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
thingiverse
free
Geology Soccer Trophy / Cup by PainORexe
...ering and spade. star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
thingiverse
free
Rummy Cup Holder by RalfCologne
...ering and spade. star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
thingiverse
free
Pokerstars Dealer Button by ChrisDaley007
...nd spade. star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
enjoy!
thingiverse
free
Grinding Locator for Parkside PFBS 12 A1 by DaniloHammer
...ering and spade. star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
thingiverse
free
Tanjiro's Earrings by Torcivia
...ering and spade. star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
thingiverse
free
Paper Holder From bathroom by Gammeboy98
...ering and spade. star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
thingiverse
free
Cat´s harmony by inart
...ering and spade. star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
thingiverse
free
king crimson fidget ring by nem_tomi
...ering and spade. star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
thingiverse
free
Four Finger Ring West by ZSawyer92
...ering and spade. star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
Sjdannen
thingiverse
free
Destiny Engram Hollow by sjdannen
...rint. once that was done, an illuminated engram seemed like an even better idea. so i chopped off one side and hollowed it out.
thingiverse
free
MT1 Pen Press Remix by sjdannen
...r model came in super small.
all i did was take silverhawk's model, scale it and re-export the stl. fit great in my lathe.
thingiverse
free
Handlebar Mounted voltmeter by sjdannen
...e off of ebay and then adjusted the mount to fit how much handlebar space was left and change the casing to snugly fit the gauge.
thingiverse
free
Givi E50 Case Cupholder by sjdannen
...ere my laptop was also being stored. i made this cup holder to fit in to the slots of the top case and keep my coffee cup still.
thingiverse
free
Jeep Headlight Receptacle by sjdannen
...on i now have is whether or not printing these parts in pla with allow the part to misshape due to engine and environmental heat.
thingiverse
free
Remington HC4250 22mm trimmer guard by sjdannen
...ver long you want it for your hair.
tinkercad link is https://www.tinkercad.com/things/ffou3uxzgkr-remington-hc4250-trimmer-guard
thingiverse
free
Rexing V6 & ITrue X3 Dash Cam mount by sjdannen
...eded to sand it down but i imagine that 20% fill would be just fine.
it may fit other dash cams like the telico c55 and itrue x3.
thingiverse
free
Destiny Engram Hollow (corrected) by Spirit00
...model - third picture shows errors in stl by sjdannen i take no guarantee the top to fit -...
Breville
design_connected
$21
BREVILLE Citrus Press
...breville citrus press
designconnected
breville citrus press computer generated 3d model.
3ddd
$1
Breville Barista Express BES870XL/ BES870CBXL
...ет. в архиве есть файлы max/ fbx/ mat. все текстуры и материалы имеют индивидуальное имя на английском языке.
приятных рендеров!
thingiverse
free
Breville by sammywhiskas
...breville by sammywhiskas
thingiverse
crude replacement catch, but does the job.
thingiverse
free
Breville 54mm Portafilter tamp stand by ian_taylor4
...ss bes870).
i use this adaptor to fit the 54mm into the breville smart grinder (used with the larger 65mm breville portafilter).
thingiverse
free
Breville Steam Lever by masterross
...press
the objects are not printing orienteted!
check images how should they be.
the lever is printed with custom support 20x20x10
thingiverse
free
Breville coffee distributor organizer by xenonz
...breville coffee distributor organizer by xenonz
thingiverse
breville coffee distributor 53mm organizer with razor support.
thingiverse
free
Breville Barista Express 860XL water float
...the breville barista express 860xl espresso machine. the side docking pins broke on mine and breville have discontinued the part.
thingiverse
free
Breville - 51.7mm Coffee Tamper by DiaLFonZo
...mm coffee tamper by dialfonzo
thingiverse
i did that for my breville cafe roma espresso machine.
made to fit the stock basket.
thingiverse
free
54mm Dosing cup for Breville Barista Express by babaNmama
...54mm dosing cup for breville barista express by babanmama
thingiverse
breville 54mm dosing cup
thingiverse
free
Breville Toaster Oven Hook by rajrat
...ajrat
thingiverse
use this hook to pull/push a hot toaster oven grate. stores conveniently on your breville toaster oven handle.
54Mm
3d_export
$19
Pancakes on Frying Pan
...5 edges: 0<br>object:<br>- dimension mm: 416mm x 250mm x 54mmlt;br>- dimension cm: 41.6cm x 25cm x 5.4cm<br>- dimension m:...
thingiverse
free
cnc dush shoe 54mm
...cnc dush shoe 54mm
thingiverse
dust shoe for 54mm router
thingiverse
free
Laptop 54mm fan case by stinguc
...laptop 54mm fan case by stinguc
thingiverse
case for a 54mm laptop fan
thingiverse
free
Biesse vacuum suction cup 54mm
...biesse vacuum suction cup 54mm
thingiverse
biesse vacuum suction cups 54mm
thingiverse
free
Cap Rack Hole 54mm by thiiks
...cap rack hole 54mm by thiiks
thingiverse
cap to a 54mm hole in a 1mm metal sheet
thingiverse
free
54mm Dosing Cup by Gaetano_print
...remix(source: thing:4288531)
main difference is the smaller size with a total height of 60mm.
more pictures will follow soon.....
thingiverse
free
Filament Holder 54mm by Heiden
...pool holder for 54mm inner diameter spools.
outer diameter is 55mm
inner diameter is 8.5mm
if you need other sizes let me know ;)
thingiverse
free
Lexus Center Cap (54mm) by Thanatophobia
...nter cap (54mm) by thanatophobia
thingiverse
54mm lexus centre wheel cap. for use on 350z/370z oem wheels.
print in petg/abs/asa
thingiverse
free
Blast Gate 50mm / 54mm
...blast gate 50mm / 54mm
thingiverse
for 3d print or wood (cnc)
thingiverse
free
Pipe Cylinder 54mm x 97mm by kjamimate
...pipe cylinder 54mm x 97mm by kjamimate
thingiverse
this is a pipe cylinder 54mm x 97mm i made for a project.
Dosing
turbosquid
$25
Automatic Chemical Dosing System
...3d model automatic chemical dosing system for download as max on turbosquid: 3d models for games, architecture, videos. (1270075)
3ddd
$1
Saeco Ulisse - DOSING GRINDER
...rinder machine
manufacturer: saeco
product name: ulisse
textures: jpg and png (3000px)
materials: vray 2.3
render used: vray 2.3
3d_export
$5
Spray Can Sprjhdose 3D Model
...spray can sprjhdose 3d model
3dexport
spray can spr?h dose
spray can sprjhdose 3d model dot89 53681 3dexport
3d_export
$5
Capsule Pills 3D Model
...edicine drug capsule health dose
capsule pills 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl lewi 102047 3dexport
3d_export
$29
Fostair Asthma Inhaler 3D Model
...ngs lung science oxygen air 3d max dispositive device dose albuterol
fostair asthma inhaler 3d model rodrigoamorim 98688 3dexport
3d_export
$29
Symbicort Asthma Inhaler 3D Model
...s lung science oxygen air 3d max dispositive device dose albuterol
symbicort asthma inhaler 3d model rodrigoamorim 98689 3dexport
3d_export
$12
Alenia Asthma Inhaler 3D Model
...ungs lung science oxygen air 3d max dispositive device dose albuterol
alenia asthma inhaler 3d model rodrigoamorim 98687 3dexport
3d_export
$29
Vannair Asthma Inhaler 3D Model
...ng science oxygen air 3d max dispositive device dose albuterol spray
vannair asthma inhaler 3d model rodrigoamorim 98690 3dexport
3d_ocean
$15
Simple Camera
...mb ,fbx multi format, obj multi format a simple dosing of a camera part is separated for rigging poly...
3d_export
$69
Asthma inhaler Pack - 4 devices 3D Model
...e oxygen air 3d max dispositive device dose albuterol spray
asthma inhaler pack - 4 devices 3d model rodrigoamorim 98691 3dexport
Cup
3d_ocean
$2
Cup
...cup
3docean
bardak cup glass tea cup
low poly cup
archibase_planet
free
Cup
...planet
cup teacup kitchen ware glass cup coffee cup demitasse
cup n110413 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cup
...cup
archibase planet
cup teacup coffee-cup
cup - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cup
...cup
archibase planet
cup teacup coffee-cup
cup - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cups
...cups
archibase planet
cups cup teacup teacups
cups - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cups
...cups
archibase planet
cups cup kitchen ware
cups - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$7
cup
...cup
3dexport
this is a cup
3d_export
$7
Cup
...cup
3dexport
cup
3d_export
$5
cup
...cup
3dexport
cup
3d_export
$5
Cup
...cup
3dexport
cup