Thingiverse
5.0 liter ITX Case by KamikazeJoe88
by Thingiverse
Last crawled date: 5 years, 2 months ago
PLA
0.4 mm Nozzle
0.2 mm Layer
Hello, this is my Project to make a really small ITX Case 3D Printable.
You will need to print only 3 parts. Its the best ITX-Case ive build anytime (the 9th one). Best coolingsolution for this little diameter of 219x186x125mm. Mountable fan in the front.
Needs:
ITX Motherboard 170x170mm
CPU Cooler max. 45mm in heigh
GPU max 180mm long
You also may need a really tiny Powersupply, i have found a used 220W Powersupply on the bay :-), diameter about 42x50x170mm.
120mm Cooler
SSD 2,5mm 7mm heigh
Dont forget to have a look on the Backplate, you surly need some changes here!
Im Constructing another Model with "Standard" ITX Parts right now.
Best regards from Germany
0.4 mm Nozzle
0.2 mm Layer
Hello, this is my Project to make a really small ITX Case 3D Printable.
You will need to print only 3 parts. Its the best ITX-Case ive build anytime (the 9th one). Best coolingsolution for this little diameter of 219x186x125mm. Mountable fan in the front.
Needs:
ITX Motherboard 170x170mm
CPU Cooler max. 45mm in heigh
GPU max 180mm long
You also may need a really tiny Powersupply, i have found a used 220W Powersupply on the bay :-), diameter about 42x50x170mm.
120mm Cooler
SSD 2,5mm 7mm heigh
Dont forget to have a look on the Backplate, you surly need some changes here!
Im Constructing another Model with "Standard" ITX Parts right now.
Best regards from Germany